Fitting the EGR Cheater

[Kojot]

Re:

So can I use this one for a Astra G x12xe? And do I connect them like this?

EGR Cheater wiring colours

white (green) goes to pin A (wire colour changed to white on latest versions)

yellow goes to pin B

[pin C is not used any more]

blue goes to pin D

red goes to pin E

Oh and with a negative EGR, should i leave it in or should i get a plate instead?

Thanks in advance

 

[vocky]

The non-z22se egr cheater is not available from the z22se shop, it's never been tested and so we don't supply them.

If someone could make one and try it then perhaps we could sell them sometime in the future

 

[john2666]

Hi Vocky, tried to do the £10 donation thing for the EGR cheater but it says dont use to pay for egr cheater or do i just go to the shop?
cheers mate
ps where do i get a blanking plate ?

 

[richard]

click on the shop link to buy the egr cheater m8

 

[vocky]

blanking plate is from the dealers, about £3.50

egr plate: 24575592

 

[Matt]

Hi Vocky, tried to do the £10 donation thing for the EGR cheater but it says dont use to pay for egr cheater or do i just go to the shop?
cheers mate
ps where do i get a blanking plate ?

As already said, EGR Cheater has to be purchased through the shop:

https://z22se.co.uk/shop/product_inf ... ucts_id=31

 

[luki244]

i know that iz old subject, but I have question vocky U still do those cheaters? i was thinking about geting one

 

[Matt]

i know that iz old subject, but I have question vocky U still do those cheaters? i was thinking about geting one

If you want an EGR cheater, they are available to buy through the Shop

 

[Inovator]

Did anyone test the non z22se EGR cheater? What kind od relay should be used?

 

[cpwfos]

on a quick look round my egr valve i cant see any air pipes connected to it ive read in earlier posts that a cam breather pipe
needs blanking with 2ps or an oil catch tank fitted which is my ideal but where is this pipe located ?plus if i do this will it be ok
1)fit cheater
2)remove egr valve completely
3)blank off hole
4)plus if i find it fit breather pipe to oil catch tank
im sorry if this sounds thick i just cant seem to piece the info off all these threads together

 

[cpwfos]

would this be ok
http://cgi.ebay.co.uk/ALLOY-OIL-CATCH-T ... 286.c0.m14

 

[vocky]

you don't need to blank that pipe, just fit a vauxhall blanking plate and fit a cheater.

to remove that pipe you would need to fit the egr blanking plug, there is a thread with the part number, it's a non vauxhall part

 

[vocky]

here you go, this is the thread

viewtopic.php?f=86&t=12915

 

[cpwfos]

so the pipe that goes into where hes put that plastic blank under the throttle body would instead go into the oil catch tank i wanna fit also if i do fit the catch tank would i also have to put the balnk as shown in that thread im sorry im confused a bit

 

[vocky]

the oil catch tank goes to the cam cover - if you wish to fit one that is

the blank goes to the 2.2 inlet manifold and is for the egr pipe removal, nothing to do with the oil catch tank system

 

[cpwfos]

fitted my egr cheater just now with pins into the plug to make sure i get no errors codes before i start cutting wires i have just a few questions 1 would i get an error code straight away i left it running for 5 mins and reved a bit and fine and 2 my idling seems rough now will this be resolved when i remove the rest of it (valve and pipe) cheers for any help

 

[cpwfos]

just took it for a spin up the motorway and had no problems at all but when i stopped at home idling does still seem a little bit jerky

 

[vocky]

the blanking plate is what will fix the idle, the egr cheater just mimics the valve for the ecu

 

[cpwfos]

nice one thanks for all your help by the way

 

[Gizmo]

The non-z22se egr cheater is not available from the z22se shop, it's never been tested and so we don't supply them.

If someone could make one and try it then perhaps we could sell them sometime in the future

Hi Vocky, Been looking through these pages and I'm interested in making the relay type up and giving you guy's some feedback... There is a few vauxhall's I can try this on, My Frontera "B" (X22SE) is the First, and there is a couple of mates (Corsa's B and C) I've spoke to too that are willing

My Question is how could I test to see if it is negitave pole type? and what if any damage would be caused if wrong type fitted? notsure.gif

Many Thanks