2.2 vectra b exhaust manifold

Timbo

Member
Could try:
http://www.ebay.co.uk/itm/Stud-Extractor-Remover-Installer-8-19mm-1-2-Inch-Drive-Sealey-VS7232-NEW-/400889357545?pt=LH_DefaultDomain_3&hash=item5d56de24e9
or
http://www.ebay.co.uk/itm/3-8-1-2-S...303?pt=LH_DefaultDomain_3&hash=item27f9bcfacf
or
http://www.ebay.co.uk/itm/Irwin-Bolt-Grip-Remover-Extractor-5-Piece-Expansion-Set-10504635-/381237641748?pt=LH_DefaultDomain_3&hash=item58c388c214
I've got this type, works well.

Sorry not with you lol
What Carl means is take the downpipe off, wind a standard nut on the remains of the stud and burr the top over to "seal" the nut on the stud. Then unscrew it.
Of course, this only works if there is enough thread to stick through the nut!! ;)
 

Dave Gilbert

Senior Member
Or if you have a welder weld the nut to the stud.

soke the threads with wd40 to try n loosen the stud from the manifold.
 
Top