Z22SE engine, It's off a 52 plate VX220, done 75k miles. I've owned the car since 37k/2005. Inlet was kept totally standard apart from derestriction, and it was fitted with a 200 cell cat and WeaponR, and had a replaced timing chain about 20k miles ago.

About 7k miles ago I fitted a new ported cylinder head from ebay and some Comp Cams stage 2 cams. About 5k miles after that, a valve seat broke up and the valve fell off, making a hole in the cylinder head and the piston. I took the engine to bits and the bore was perfect, not a single scratch. I installed another piston (thanks to vocky 🙂 ) and put the old head back with some performance cams and it's been great ever since - for about 1-2k miles. I'm now fitting a 2.4L lump I ordered from the states when the valve seat broke so I don't need this any more.

While I was happy with it in my car, I'd like anyone buying this to buy it with that in mind. Also being aware that this engine didn't have a new con rod or con rod bolts, or new head gasket or head bolts when I put it back together the last time. I'll say around £450 for the block/head/sensors on block. Sorry but I can't supply the fuel rail as I need that for the 2.4..

Other stuff I have that I'd like to get rid of now I'm going 2.4. Prices are hastily added, so I'm open to offers. If you want pics/info let me know. The 2.4 engine stuff is off a car that did 7 miles, so it's basically new.

1x Stage 2 NA Z22SE Comp Cams. Been used for about 5k miles before the engine died, but there are no marks on them. £250
1x Z22SE totally standard cams. £50
1x 2.4 INLET MANIFOLD £120
1x 2.2 EGR £30
1x 2.2 EGR faker (on a plug) £20
1x 2.2 Lambda faker for the vx220 post-cat lambda (on a lambda sensor plug, with resistors for heater load) £30 TAKEN.
1x 2.2 Inlet Manifold £15
1x 2.2 Inlet Manifold cut down to about 4cm of pipe - was when I was looking at TBs - free.
1x 2.2 Throttle body £40
1x 2.4 Throttle body £50
1x VX220 air box + pipe £40
1x Trashed ported head. It's a mix of stuff. It's got most blanking plugs/plates on still, some good lifters, good rockers, 3 cylinders worth of almost brand new valves. and all springs. £25 (Rockers, cam + bearing caps TAKEN, the rest is left).
1x Set of 16 replacement std valve seats. Came in a GM gasket set. £5
2x VX220 cat pipes (one with precat 35k, one without _50k) £50 each
1x VX220 cast exhaust manifold £30

I live on the A14 near Cambridge (Fen Drayton), obviously most of this stuff is big/heavy so collection would be preferred.