Project Freeze My Ass Off (rear Poly Bush's Astra G)

evocarlos

Stupid Bollocks
Staff
yes same fitment there drop in only issue is the coupe is a 4 seat and the gsi a 5 seat and they sometimes question it on the mot so i cut the 3rd belt out the seat and now its a 4 seater again :)
 

milo

Senior Member
Ok I'll do the same cheers for that.

Why the coupe off the road? Is the lever snapped again? Or u got bad snow like we've had over the last few days
 

evocarlos

Stupid Bollocks
Staff
fertan at work :)
some chipped paint where the side skirt fits altho the galvanising has stopped the rust to now
WP_20160401_18_25_09_Pro.jpg

rust on the spot welds treated
WP_20160401_18_25_20_Pro.jpg

flaky bit at the top
WP_20160401_18_25_25_Pro.jpg
 

evocarlos

Stupid Bollocks
Staff
had a mishap with a heavy bag and my mod
WP_20160328_16_25_57_Pro.jpg

it broke the tank and fired the mod repeatedly burning one of the gsi seats
WP_20160328_16_26_17_Pro.jpg

went and picked up a 2nd set today if any one say you cant get a gsi interior in a coupe there lying :) rear back was split into 2 and went in the boot
WP_20160429_15_09_56_Pro.jpg

front seats on the back
WP_20160429_15_10_16_Pro.jpg

there good for the cheap price I paid :)
WP_20160429_15_46_56_Pro.jpg

rears need de glittering
WP_20160429_15_47_05_Pro.jpg

even come away with the twin buckle so it can now pass the mot with no question for the lap belt
WP_20160429_15_47_12_Pro.jpg
 
Last edited:

evocarlos

Stupid Bollocks
Staff
leather repair kit out :)
WP_20160507_11_07_03_Pro.jpg

1st coat
WP_20160507_11_35_44_Pro.jpg

2nd coat of color
WP_20160507_13_02_58_Pro.jpg

lacquer on thats a good spare drivers seat
WP_20160507_13_19_24_Pro.jpg

took the bottom off the passenger seat
WP_20160507_15_15_27_Pro.jpg

then took the burnt one off
WP_20160507_15_15_32_Pro.jpg

boom good seat again
WP_20160507_15_37_12_Pro.jpg

even got the center console back in for the mot
WP_20160507_17_13_00_Pro.jpg

the driver seat after a few hours in the sun and with a coat of megs leather cleaner/balm
WP_20160507_17_15_12_Pro.jpg

got some fluff in the boot so i shaved it off
WP_20160507_17_46_50_Pro.jpg

better
WP_20160507_17_49_02_Pro.jpg

that will do :)
WP_20160507_18_10_48_Pro.jpg
 

milo

Senior Member
When at cs carl, they told us u got a harrop sc when u starting that install? Aiming for 400hp?
 

evocarlos

Stupid Bollocks
Staff
been and fetched a 2nd set of twintops this time et41 made by speedline there going on the rear need to keep the et37 on the front for the new breaks
the 2 good ones pictured the other 2 are cracked and scuffed to fk but salviable ive already sold them to a guy making a signum trailer :)
WP_20160522_15_44_52_Pro.jpg

speedline
WP_20160522_15_45_20_Pro.jpg

et41
WP_20160522_15_45_25_Pro.jpg

love this pic of the new stoppers :)
WP_20160521_18_19_49_Pro.jpg
 
Top