2.4 Inlet General 2.4 Inlet Manifold Questions

[K70 RAF]

You also wont need to replace the servo one way valve will you?

 

[vocky]

You also wont need to replace the servo one way valve will you?

You should be able to just extend the rigid plastic servo pipe to the new 2.4 inlet manifold position with a short section of servo hose

 

[Andy]

Neil i take it the EGR pipe won't connect to the 2.4 manifold, still not removed my EGR valve yet despite having my EGR cheater sat on my desk for ages

 

[luna_s]

no it wont,

you could blank it off and attach the egr valve to a bolt for now

 

[vocky]

the 2.4 inlet manifold has no egr fitting, so the egr system must be blanked off

 

[Arnie]

Hi,
can one of you very helpfull gents tell me roughly how long the additional 10.5mm Brake servo hose needs to be, Im going to try and source one this weekend from a scrappy.

Also I'd like to make the new ECU mounting brackets ready for the new manifold drool.gif Is anyone able to post up the dimensions of the brackets needed?

TIA

Clive

 

[Daz]

How long is the loom for the ecu neil??as relocating it seems the best idea...

 

[vocky]

Hi,
can one of you very helpfull gents tell me roughly how long the additional 10.5mm Brake servo hose needs to be, Im going to try and source one this weekend from a scrappy.

just measured it, 450mm from the vx220 one way valve to the inlet manifold

 

[vocky]

How long is the loom for the ecu neil??as relocating it seems the best idea...

easiest method is to fit a couple of brackets cheers..

 

[Daz]

Will see how it goes....gonna do jamee's 1st as the guninea pig lol....also can the supressor from the back plate be reused?

 

[Jamee]

Mine will be done properly thankyou very much!! lol

 

[Daz]

I didnt say it wudnt pmsl....

 

[Jamee]

Well i think you cant make it run any worse than does at the mo with the idling prob. lol

 

[Daz]

Hopefully we shud cure that at the same time m8...

 

[Jamee]

i hope so!

 

[Arnie]

Thanks Vocky - you really are a star!

 

[vocky]

Will see how it goes....gonna do jamee's 1st as the guninea pig lol....also can the supressor from the back plate be reused?

it can, but you need to destroy the cover to remove the suppressor :roll:

I thought it best for people to keep hold of it just incase the alternator needs exchanging at some point in the future for a new alternator dunno..

 

[Arnie]

Having a bit of difficulty getting the bit of brake servo hose needed, all the scrapyards I speak to wont let you rummage anymore and aren't prepared to look them selves unless you give them a model and year so..........does anyone know a model that will have a bit of 10.5mm servo hose under the bonnet or even a partnumber ?

TIA

Clive

 

[JohnnyN]

Corsa and old Astra I believe. Vocky will confirm.

 

[andyroo]

The scrappy I went to had a 1995 corsa which had the correct servo pipe (which is 12.5mm, Vauxhall only specify 8mm and 12.5mm for this application) and plenty of it too. If you dont want a nipple for the vacuum take off for the fuel then you should be able to pilfer the one way valve too