LSJ coil packs to z22se ecu investigation

[KevinH]

That is brilliant Carl !

 

[evocarlos]

the eml came back soon after doing the black/white to the violet wire but did not cause any issues with mapping or running
ive just took the car to vx and had the aircon regassed when it was restarted the eml went off for the cam sensor lol

 

[vocky]

well I tried and failed to get these to work on my Webcon ECU

going to link the low ref to ground (as per post 2) and try that next

 

[evocarlos]

well I tried and failed to get these to work on my Webcon ECU

going to link the low ref to ground (as per post 2) and try that next

not running right or not at all ?

 

[vocky]

won't even fire, linking the wire never helped either, even tried some saab coil packs - no difference

 

[evocarlos]

i dont know what the output of the webcom is ?

had the eml come back on after 4 days of driving with no lamp on
im now looking at using the icm to drive the lsj coils or get an msd cam sync generator

 

[ramy sawaby]

ive never owned a bm so cant say for that
the z20net and the lsj have individual coils its the z22se coil pack that has to be adopted to the z20net in this case
so trying to reverse engineer the single coils back on to the z20net but with the drive of the z22se ecu
they do look better on the engine than the modified z22se dis pack
View attachment 48905

think the main problem now is the simulated cam signal but other than that it will work

 

[evocarlos]

??

 

[evocarlos]

returning to this thread now to finally see about making a hybrid system of z22se icm and saab coils

something like this

 

[evocarlos]

gone for a change in direction so the z22se coil pack has gone back on