Project Freeze My Ass Off (rear Poly Bush's Astra G)

milo

Senior Member
Nice drive by video as well. So we can hear the whine coming and zooming past
 

evocarlos

Stupid Bollocks
Staff
its a bit more aggressive now low down and it pulls hard all the time not just when cold :)
will get a new one at some point hard to do on my own lol
 

milo

Senior Member
Well make sure you film the technician at CS thrashing the crap out of it, I mean getting the remap set up correctly ;)
 

MikeS

Former Staff
Senior Member
fark
so you pick me up bout 6 ?
full
 
Last edited by a moderator:

evocarlos

Stupid Bollocks
Staff
You replacing your original one then Carl?
yeah this other one is as new its not even got any coating missing from the rotors all bearings are tight and theres no play in the gears or coupler and the rotors are balanced and it was cheap as chips :)
dry teflon coating
WP_000011.jpg

WP_000013.jpg

broken bypass valve nipple
WP_000014.jpg

barb to fix broken nipple
WP_000015.jpg

drill holes in the rotors from inside the charger for balancing
WP_000023.jpg
 
Last edited:

evocarlos

Stupid Bollocks
Staff
couple of little jobs done ready for fitting tomorrow
fixed the broken nipple
WP_000024.jpg

and bent the brake servo pipe straight and refitted it
before and after
WP_000014.jpg WP_000025.jpg
 

evocarlos

Stupid Bollocks
Staff
inside the lsj throttle body only took it apart to make sure the dents in the cover had not damaged the wipers
WP_000026.jpg

the dents
WP_000027.jpg

the dents removed
WP_000028.jpg WP_000029.jpg

some more work on the charger's
zzp boss removed for one charger
WP_000031.jpg

fitted to the new one
WP_000032.jpg

also checked the oil only 80ml of the 100ml that should be in there
put 100ml of new atf dex2 in :)
WP_000034.jpg

it now installed :)

heres the vid i think i like it :)
 
Last edited by a moderator:
Top