help with part numbers

[Pleomaxx]

hello guys.
i have a z22se engine im looking to rebuild all original but i cant seem to find the part numbers.
so if anyone have the part numbers for original crank bearing and rod bearings
any curious where do u find the part numbers ?

would you change the lower bolts used to assemble the 2 lower parts ?
and last
of you where doing a rebuild like this any minor improvements you would do when it allready is taken apart ?
like thicker head gasket( if it makes any difference) and so on it just have to be cheap since its a low budget rebuild.

 

[vocky]

https://www.speedsterclub.nl/biblio...e and clutch/2 Z22SE petrol engine/index.html
https://www.speedsterclub.nl/biblio...e and clutch/2 Z22SE petrol engine/index.html
Not much point swapping the bolts, they are not tightened enough to stretch.

Balancer delete is worth doing with engine apart - cost = £0

 

[Pleomaxx]

perfect site just what i was looking for
i have already removed balance shaft
any chance you have a simular site with all torque settings i need when assembling
im kinda nervous to assemble it i recived the entire engine dissasembled and 8 boxes so it gonna be fun

Okay ive now seached ebay.co.uk and .de with the part numbers from the site you linked and i cant find any of the bearings i need ? any idea what im doing wrong ?

 

[KevinH]

Unfortunately many of those part numbers have now been superseded with new ones.

Do you require standard size crank bearings and rod bearings or u/s 0.25mm or u/s 0.50mm ?

 

[Pleomaxx]

im taking my chances and buying standard since i need everything done in a weekend and the crank will be pulled out from a running engine witch never have been opened

 

[KevinH]

Torque Settings here:
https://z22se.co.uk/resources/2007-l61-2-2-bolt-torque-specs.29/

 

[Pleomaxx]

Thanks a million this site is golden

 

[Pleomaxx]

Okay i am now inspecting the oil pump wich looks fine and now im wondering Should i give it some gansket or is it suppose to be metal against metal?

And anyone with an Idea what the tap in second Photo is called i cant find One but need it for ny rebuild

 

[Pleomaxx]

 

[IDI AMIN]

You do not use any gasket. It is indeed metal against metal.

And anyone with an Idea what the tap in second Photo is called i cant find One but need it for ny rebuild

The part you need is called woodruff key or crankshaft key. The cost for this part in the uk is less than £2.00.

It should be a similar price in your own country.

http://ecat24.com/opel/catalog/part/1/40/188/1092/11129,11144,11141,11157,11117,11139,11155/

No. 17 on this page

 

[Pleomaxx]

perfect i called my local opel stealer they said they couldnt get one kinda strange for a autoriced shop
thanks for the help so far there is proberbly gonna come more questions

 

[Pleomaxx]

Just Got the head back from wash i got washed 3 times 1 with just water 1 with some kind of soap and then I soaked it in engine cleaner for 30 min and back in with clean water and it still looks Really dirty