ALOT of trouble codes

[Pleomaxx]

hello clever guys.
i finally recieved my op-com and i figured i would activate my cruise control since everything else should be ready for it.
before i did so my egr is broke.
well i activated it and it didnt work BUT now my car doesent show my speed.
it stays at 1500-1700 rpm in idle at all time not matter cold or warm.
i have all these fault codes after a complete read out.
the faults i know is new since i tryed activating is
b1012-00
p0500-00
p1390-00
p1395-00
u2105-71
u2139-00
p0500-71
b0550-71
all these codes came after i tryed to activating cruise control.
how can all those come after just that.
and the info display displays a steering wheel and a car with a wrench over it.
any thought on where to start with this madness ?

 

[Johnss]

You got Signum 2.2 direct?
I'm no expert, but it seems to be screwed up ecu.

 

[Pleomaxx]

Vectra c 2.2 z22se.
I took the battery off for 10 min to reset now it idles fine and no warning light but the codes still shows on the tester

 

[JonRobinson82]

Might need to disconnect battery for a bit longer to clear them, or maybe just reset with opcom?

 

[Pleomaxx]

I have trues to clean all codes with op com they just keep Comming i Will try taking off the battery for longer.
Any Idea og i ham her output test to work in op com i cant click on it it is like it isnt a part og my hardware/software.