david gilbert said:
special(y)
🙂 i like shiny new tools
Sjdickso said:
You will need a second bat cave soon!
got plenty of room now i cleared it out you will have to pop down and have a look 🙂
corsaZ22se said:
I do like the mitutoyo verniers used to use their stuff when I work in fabrication, we found it much more accurate than cheeper brands and better life span. (y)
yeah there nice but a bit steep at £118 :confused:
right went out and did a bit of playing with the crank
cleaned all the holes out with break&carb cleaner with my new brush
journals are all clean and tidy now the shaft is still a bit dirty hopefully it will get cleaned if i use it
new tool made life easier
each journal got measured 4 times
w1 = woodruff key end w2 = same journal but other edge
f1 = flywheel peg so 90% difference to w1 and f2 is as above
some mixed readings but engineer dad says after .00 theres not much difference 🙂
used z22se crank has 55.980mm on most
brand new saab crank 55.993 🙂
