evocarlos Dave Gilbert said: Engine in with clutch, then fit gearbox? If the clutch didnt stick out about a ft you might have got away with it.. am I right? Do I get a prize? you make no sense 🙂
dewismotorsport Oh so you mean totally welding the big balancer shaft holes up, that's something ideally done when it's a bare block I suppose
evocarlos dewismotorsport said: Oh so you mean totally welding the big balancer shaft holes up, that's something ideally done when it's a bare block I suppose no im mean just the 2 x 5mm holes in the outer rim so the oil cant get out but can still follow to the lower block
evocarlos i sneezed and this happened pain in the arse had to remove all the drive shaft and unbolt it from the hub and bracket just to bolt it to the block six speed sunday! 🙂
evocarlos the engine it floats in mid air 🙂 also put the water cover back on it nearly looks like a car again after so many months 🙂
evocarlos corsaZ22se said: so you used snot not spit to lube her up and slip it in then :LOL: well done. (y) lol had no choice snotters been running round more than matt does 🙂
Dave_Gilbert Is it running yet? Its only been off the road about 6month mines only been off the road about a month so far so im not judging hahaha
evocarlos stripped the inlet and dropped it off for cleaning then gave the laminovers a blowout 6l of new oil to go in https://www.youtube.com/watch?v=FhQiU9K920A
evocarlos Dave Gilbert said: What was you doing to the dog at the same time as turning the engine over? Haha the wretched noise is the vacuum pump for the brake servo the pipes off so it sounds like a shit spreader
evocarlos plugged in the new toy to test it 🙂 sensors reading air fine touch screen controls for the settings bar graph setting also
Marty64 evocarlos said: six speed sunday! 🙂 [ATTACH]60247[/ATTACH] See the brake vacuump pump : what exhaust cams have you finally use ? B207R exhaust, B207 inlet or Z22SE inlet one, Comp Cams ?
evocarlos Marty64 said: See the brake vacuump pump : what exhaust cams have you finally use ? B207R exhaust, B207 inlet or Z22SE inlet one, Comp Cams ? @[deleted] these were them https://z22se.co.uk/threads/project-freeze-my-engine-off-saab-b207r-supercharged.24909/page-36#post-1238562 today i took the alternator apart and cleaned it up then fitted new bearings
Sjdickso evocarlos said: ive got an itch for the new powerflex parts that i dont yet have ""gotta get them all"" What you missing, subframe bushes?
evocarlos Sjdickso said: What you missing, subframe bushes? #30 #21 #22 #20 (#20#21 are now for the vxr due to the box )
