Z22YH Vectra C and Signums....John Ashley Manifolds

[SuperHeavy1203]

As the title says.

I have been 'talking' with John Ashley through emails recently concerning a free flow manifold for the Z22YH engined Vectra C and Signum.

In the New Year he wants an unmodified Z22YH for 3 days-ish to allow the design and manufacture of the manifold.

Unfortunately Im not local to Walsall.

Who is local to Walsall, with an unmodified Z22YH Vectra C or Signum who could let John Ashley have their car for 3 days?

You will receive a discounted price for your assistance.

 

[rushy]

You may also find the z22se manifold to be the same as the yh bud. A bit more research may be needed but i'm sure the dblias one would fit both, if so a z22se vec c would do for the fitting.

 

[SuperHeavy1203]

John said the bolt config is the same etc

But he wants to make sure the connection at the flexi joint is 100%

It wouldn't be hard for an exhaust builder to cut 'n' fab a connection if the SE manifold bottom joint isn't right.
Here's a chance for a discounted 100% perfect fit manifold. Probably much cheaper than Lexmaul or Dbilas???

If I was local I would happily let John use my Signum.