Inlet flange/spacer

[alanoo]

I need to space my intake manifold a bit, something around 8 or 10mm

If anyone has an unused inlet flange for a Z22SE lying somewhere, I'll be interested.
Let me know,

 

[cavaddict]

Do you want heat resistant?

 

[vocky]

I fitted a heat resistant spacer to mine (forgot the correct name :silent: )

 

[alanoo]

Don't care (CF manifold), but I doubt the thermal gaskets are thick enough.

I have an inlet flange coming from the states, but will be happy if anyone has one somewhere in the good side of the world

 

[cavaddict]

Basically, i have 6mm heat plate spacers...or 10-12mm (cant remember which) aluminium spacers here...the aluminium spacer have the inlet port sparked 1mm higher than normal due to a drawing room cockup, but if you're ported this shouldn't be a prob.

 

[si.c1978]

i can make one as well if needed.

 

[alanoo]

Basically, i have 6mm heat plate spacers...or 10-12mm (cant remember which) aluminium spacers here...the aluminium spacer have the inlet port sparked 1mm higher than normal due to a drawing room cockup, but if you're ported this shouldn't be a prob.

Well, the head is ported, but the "opening" face is not (big enough stock, BTCC inlet opening were not bigger than stock).

Might give a 6mm heat spacer a try I guess, this "may" fit and could always easily be reselled if not,

PM on the way