Can this supercharger be used on the Z22SE?

[li-ion16]

Hi all,

Came across this and wanted to know if this would be suitable for use on a Astra G Z22SE:

http://www.ebay.co.uk/itm/NEW-GM-CH..._Accessories&hash=item3cbb65ff6a#ht_500wt_949

Any help or comments would be great.

Dave.

 

[JohnnyN]

Looks like an Eaton M62 to me and that's the correct item.

 

[li-ion16]

Looks like an Eaton M62 to me and that's the correct item.

Cool, thanks for the reply.

 

[cologne]

but pulley is to great to z22se and it is for a 6 ripp belt. and the map sensor is not for z22se pcm. the trottle is also a great one.
this things are normal because in usa the sc is for a 2.0 engine

to find an intake with laminovas is the greatest problem.

 

[li-ion16]

Thank for the reply Cologne. I had noticed the Pulley is a 6 rib and that the Z22SE has a 5 rib setup. I have found a kit which pretty much has all the parts after purchasing the above S/C which is intended for our engine. The Z22SE is also known as the L61 in the USA:

http://shop.zzperformance.com/store/p/610-2-2-2-4L-Bolt-on-Supercharger-Kit.aspx

I've not checked the MAP sensor but understand that it may not be the correct one needed. What is the problem with the TB?

 

[JohnnyN]

You can buy an adaptor plate for the throttle body from Courtenay so that you can continue to use the standard z22se body and MAP sensors are also available.

Pulley's can be changed.

 

[li-ion16]

Cool, thanks for the info JonnyN. Do you know of any reason as to why I couldn't use the TB with the S/C I brought apart from haveing to change the wiring connections on the harness?

 

[JohnnyN]

You can use the TB that comes with the SC. As you say, rewire it.