bobssy DAz wot time u gonna be there til as I dont finish work till 5, so wont be there til about 7ish?
bobssy Right now its daylight I can see more of this loose cable and its connected to a blue one, looks like its been extended and what a crap job done on it the tape dont cover all of the copper.
vocky there should be 8 wires going to the throttle body, it might be the blue wire has broken at some point dunno.. need a better pic if the blue wire is missing from the plug, then it the ecu won't know where the butterfly valve is and will keep changing the revs :roll:
bobssy Also noticed tha someone says in marks project it may need to be reprogrammed if the ecu has been changed. Do u know if this has been done mark or if its required?
vocky that wire is needed 🙁 it controls the position of the butterfly, I will have a look and see if I have a spare pin to fit the socket or visit the scrappy and cut off a complete plug the ecu should be ok, climate uses the aircon program 🙂
bobssy Cheers mate. If I were to go to a scrappy I would just cut the wires and then rejoin them or is there a plug or something I can just pull out.
vocky I have no idea, but the pin and hopefully enough wire to join to the cut blue wire is in the post 🙂 once that's fitted we can see where to go next or if it's sorted 🙂
bobssy Cheers mate, going for a diog tomoz as I been told that it could be down to the cam or crankshaft sensors. Does the z22se have a cam sensor?
