KevinH Most of the guys who have boosted use Courtenay Sport Ltd (https://www.courtenaysport.co.uk). I believe you send your ECU to them for a 'base' map then once the modifications are complete you take the car to them for a full remap on a rolling road. Someone else should be able to provide further information and approximate costs.
Rick201i KevinH said: Most of the guys who have boosted use Courtenay Sport Ltd (https://www.courtenaysport.co.uk). I believe you send your ECU to them for a 'base' map then once the modifications are complete you take the car to them for a full remap on a rolling road. Someone else should be able to provide further information and approximate costs. Hi Kevin I thought this was only available for super chargers. I'm going down the turbo charger route
corsaZ22se This was discussed a month or so ago, the stock ECU can be used for superchargers not turbo's with the Courtenay map. i forget what the outcome was regarding turbo's as the stock turbo vauxhalls use a maf and cam sensor not found on the z22se. Stand alone?
figo126 you need to email peter v.d munckhof ,peter@munckhof.demon.nl ,also known as dutch software,, but before you email him you need to know what spec of engine you are going to be using , eg turbo ,standard z22se engine , and any mods you have planned for your build so he can build you a base map,,
Rick201i figo126 said: you need to email peter v.d munckhof ,peter@munckhof.demon.nl ,also known as dutch software,, but before you email him you need to know what spec of engine you are going to be using , eg turbo ,standard z22se engine , and any mods you have planned for your build so he can build you a base map,, Cheers for that
Rick201i figo126 said: you need to email peter v.d munckhof ,peter@munckhof.demon.nl ,also known as dutch software,, but before you email him you need to know what spec of engine you are going to be using , eg turbo ,standard z22se engine , and any mods you have planned for your build so he can build you a base map,, I will look into this .expensive though at over £800 .
Rick201i I believe some one on here ran z20net management on there z22se conversion. Has the owner of the car been online since the build.
figo126 only seen one done and he used standalone ecu ,, not saying youre wrong ,but ive not seen it ,,, when doing mine the t8 management was to complicated ,, and you needed all the ecu,s from the donor car for it to work,,
Rick201i figo126 said: only seen one done and he used standalone ecu ,, not saying youre wrong ,but ive not seen it ,,, when doing mine the t8 management was to complicated ,, and you needed all the ecu,s from the donor car for it to work,, Hi A chap on here did it with a vectra carnt remember the name. So z20net management is t8 is it ?
corsaZ22se Dave Gillbert used z20net ecu set but he is in a vectra C. had to swap all the cars controllers over.
Rick201i corsaZ22se said: Dave Gillbert used z20net ecu set but he is in a vectra C. had to swap all the cars controllers over. That was the chap lol cheers.seemed alot of work .is he and the car still about?
figo126 he,s on z20net on facebook,, he had a Vectra 2.2 and a z20net for parts ,swapped all bits over like turbo,inlet manifold , all ecu,s etc,etc, its still running,
KevinH Here's a link to Dave Gilbert's build thread: https://z22se.co.uk/threads/vectra-c-2-2-turbo-sri-16valve-250-60bhp-rolling-road-to-let-me-know-soon.26623/ (63 pages) 🙂
Rick201i figo126 said: he,s on z20net on facebook,, he had a Vectra 2.2 and a z20net for parts ,swapped all bits over like turbo,inlet manifold , all ecu,s etc,etc, its still running, So it's possible to convert then .I don't do facebook
corsaZ22se Not going to be very simple to do on the Astra. Dave had to swap all the controllers from the z20net to his z22se vectra c. for you it would be easier and cheaper to go stand alone or get the Astra ECU remapped for turbo as figo said above.