tofferson Flywheel came in the post so need to get Pistons, rods, flywheel and crank to engine shop for balancing they already have my block in for bore and hone
tofferson vocky said: make sure you 'gap' the rings, any questions just ask (y) Cheers must admit I'm a bit nervous about the gapping carny just get replacement rings off the shelf 🙂
tofferson dewismotorsport said: Paint work looks nice (y) Cheers I've powder coated them at work so it's hard wearing, I've powdered a few engine blocks with good results.
tofferson Dave Gilbert said: Will it be Ready for pvs? This is my spare engine so I can keep my car on road so will prob be still using standard lump 🙂
tofferson Does anyone happen to no what pins power what on the cluster I want to power it up out of car so I can check bulbs work etc without putting it in and out all the time, also mileage display stopped working arrr
Dave_Gilbert @[deleted] will probably be best to find the wiring out. love the powder coating, the heads a really nice colour, got to be close to the colour of the car. do you do powdercoating for a living then? Looks great quality.
dewismotorsport tofferson said: Cheers I've powder coated them at work so it's hard wearing, I've powdered a few engine blocks with good results. Even better if its powder coated (y)
evocarlos pin 2 bn = gnd pin 22 bk = ing voltage pin 4 rd = constant voltage theres a lot to list :confused:
tofferson Dave Gilbert said: @[deleted] will probably be best to find the wiring out. love the powder coating, the heads a really nice colour, got to be close to the colour of the car. do you do powdercoating for a living then? Looks great quality. Yer I dimond cut and refurb wheels , also do hydrodipping and smart repairs 😉
tofferson evocarlos said: pin 2 bn = gnd pin 22 bk = ing voltage pin 4 rd = constant voltage theres a lot to list :confused: [ATTACH]60078[/ATTACH] [ATTACH]60077[/ATTACH] [ATTACH]60079[/ATTACH] [ATTACH]60080[/ATTACH] Cheers for the info I just need to understand it now lol 🙂
tofferson Got to order my bearings are people using standard gm or do the need to be upgraded? Also anyone no about what bolts need upgrading for eg main bearing bolts and flywheel, just don't wanna order wrong stuff cheers 🙂
evocarlos gm mains are good 🙂 you can get aftermarket but there like $7 a bearing 90% of the bolts that are factory fitted are good for more than you will be able to make with the engine 🙂 i put arp head studs on so i did not need to keep buying head bolts as there reuseable the flywheel bolts they dont make arp ones that bolt in directly there to long and the head is to big so best to go with new gm z22se one that are torque to yield
