resetting of the selector and gear stick to the home position on an m32 gearbox
lift up and push in the 2 tabs on the stick one either side
this will drop the locking part down
pop open the gear selector cables with a screwdriver you can see there unhooked
on the gear selector in the engine bay lift up and insert a 4.5mm drill into the alignment hole
back in the car move the stick and lock to the left side theres a slot it locates in
re secure the cable locks by pushing them down
raise the plastic lock on the stick and clip back in place
remove the drill from the gear box
check all gears are selectable job done 🙂
