VECTRA C 2.2 TURBO SRI 16VALVE 250/60BHP (rolling road to let me know soon)

rushy

Dave_Gilbert

so youv seen my bird then? hahaha

Dave_Gilbert

i need to get more pictures of marie in overalls laid under cars. hahaha,

cheers @[deleted] you have just made me abit of money, thats £30 out of the donor car so far, thats 10% towards the remap haha

Dave_Gilbert

Im looking at a oil feed pipe for the turbo off a nissan skyline. Its 30" long im told.

the oil feed will want to come from as close to the bottom of the sump as I can get it doesnt it?

Dave_Gilbert

http://pages.ebay.com/link/?nav=item.view&id=151552177629&alt=web

its cheap enough so worth a gamble

I think it will work.

Dave_Gilbert

I like the look of this aswell

http://pages.ebay.com/link/?nav=item.view&id=371222588166&alt=web

TFD

Why don' t you take the feed from one of the 3 oil plugs? :

From there it's just max 30 cm? to the turbo oil inlet?
Blue circle is feed, red circle is drain.

Dave_Gilbert

Thanks @[deleted]

I think the 3 at the top but the oposite side is the standard hole for the z20net.

Not sure on the blue circle? Is that a bolt hole?

Dave_Gilbert

Is the blue hole a threaded hole? N any one know the thread size?

Also anyone know the size of the red holes?

I just need to know them few bits n the length of the pipes then im good to go on the build.

I dont have to swap sumps over this way either.

Dave_Gilbert

Engine block core hole (m12x1.75x16.5) (0.253)

Just putting this here so I know where it is.

evocarlos

i had a plug made for the turbo drain hole in the lower cradle heres the dimensions i measured

Dave_Gilbert

Thats on the net engine just blocking it off int it.

So is it just not drilled out on the SE?

evocarlos

Dave Gilbert said:
Thats on the net engine just blocking it off int it.

So is it just not drilled out on the SE?

yeah thats it the hole is left un drilled but its like stepped in size when it is drilled out well you can see that from the pipe you have

Dave_Gilbert

Thanks carl, so I have a sump to modify, makes sence anyway with it being a bigger sump so probably need the extra litre to lube the turbo anyway.

thanks, getting it off tomorow n just need to get pipes made up and 2 alloy fittings to suit and get them welded on. Cheerz

evocarlos

the turbo return is not part of the sump.... the hole is in the lower cradle and cannot be swapped to another block the block and the cradle are machined as one part

Dave_Gilbert

Yeh I know, thats why I say I will have to modify the sump. Drill a hole n weld a threaded fitting on.

TFD

It's recommanded to drill the oem hole and not the sump because you will drain into the oillevel instead above oillevel. Not sure what's wrong with that, but that is how it's designed.

Blue circle is M12x1.75 and the plug itself is an allen 6mm.

I've read that the mx-5 guys drill the hole and flush the sump with their old oil. No need to take the sump off..... dunno.

Dave_Gilbert

I see what you mean, but I think the net sump will need to be used because its a litre bigger than the SE

But drilling that hole while the engines still fitted is going to be very difficult I think plus it would need tapping aswell.

Im thinking a fitting as high on the sump as possible. Notsure?

vx-chris

I've just read all of this and your braver then me lol.

I will say one thing and that when you do your build thread, it's going to be epic 🙂

I know it's a bit late but re your problems with opcom, there is a opcom forum if you ever have problems again. I'll try and find the link to it if you want as they may be able to help on that side of things.

corsaZ22se

oil needs to return above oil level to reduce back pressure to the turbo. if it goes below oil level pressure can build up causing seals to leak on turbo and then burn oil/failed bearings. 🙁

« Previous Page Next Page »