evocarlos the stepping the tig welding i like it 🙂 nice! this pic is for @[deleted] 🙂 it fits and no leck! got a k&n filter recharge kit in the post the sun at pvs bleached the oil out the new filter so it got washed and new oil...
dewismotorsport Looks a better solution to the shitty CS bracket, I've often thought of making something better but just haven't been arsed :ROFLMAO:
evocarlos dewismotorsport said: Looks a better solution to the s**tty CS bracket, I've often thought of making something better but just haven't been arsed :ROFLMAO: looking at the pics you could just use the lower bracket for the belt pulley you would than still have to space out the alternator ive got the lsj bracket i was going to drill and tap to fit a pulley but never got round to it the alternator bracket has a top part for the power steering pump it may be ok or it may have to come off i wont know till it gets here
evocarlos car is now running from the narrow band output of the PLX wideband controller it runs the same as with the factory narrow band on 1st test 🙂
evocarlos well it all fits 🙂 air con pump is about 1" lower i guess i wont need the spacer on the ac pump to make it work lol alternator is a bit far out imaginary belt run im looking at 5pk1980 or a bit smaller lol
evocarlos corsaZ22se said: looks tidy maybe some machining to sit alternator in further? going to try and see what the room is like then work from there the lower bracket takes up the 4th hole on the alternator so i could just cut the 4th hole off and then space out the alternator and not use the top bracket at all the pulley uses and off the shelf 6203 bearing i cheated and just freshed up the grease
evocarlos corsaZ22se said: you will be replacing that bearing soon. knowing what your like! 🙂 if i had a new one on the shelf it would of been done 🙂
evocarlos the old string a roo works out to about 5pk1860 but there's a big issue the alternators furthest edge is 7" from the block that puts it inside the radiator when fitted lol next issue is the ac bracket takes up one of the alternator bolt locations not that i use that one i went to using 3 bolts long ago lol
Dave_Gilbert Obvius what you need to do then.............. get rid of the radiator, there over rated anyway lol
evocarlos also got round to testing the fic with an rpm feed to see if it fired the injectors https://www.youtube.com/watch?v=0az5Msu6Qo4
evocarlos think the needle went past 7300 this morning it was more like 8k it was way off the end lol
evocarlos made by cobra fixed by me no more leaky flange swapped the lambda for a new denso one the thread was buggered on the old one nice fit at the back and now more clearance on the headlamp level sensor middle joint done the same and you gotta love them cams and the way it runs https://www.youtube.com/watch?v=h2D_8jPtDzg
milo evocarlos said: its rapid with only one seat and no audio installed 🙂 [ATTACH]61618[/ATTACH] That's probably one of the best photo's of your coupe bud!(not including photo shoot one's) It looks mint(y)
