pottsey dont think they did you'll need one from an omega ,then the relay and you'll need to do some wiring as well
poundy pottsey said: dont think they did you'll need one from an omega ,then the relay and you'll need to do some wiring as well has anyone done this yet? have details of what to do wiring wise relay's etc?
pottsey been a few on vvoc that have done have a look here,if it proves too techinical ,send mike dti a pm on vvoc as he could probably make one up http://www.vvoc.com/forum/showthread.php?t=266171
vocky I did the very first conversion and the official 'How 2' on vvoc many, many years ago - probably still under username 'vocky vec' :thumbup:
poundy vocky said: I did the very first conversion and the official 'How 2' on vvoc many, many years ago - probably still under username 'vocky vec' :thumbup: found the original you did but it no longer shows the pics on it only the description 🙁
poundy i now have the stalk but have been unable to get the relay. does the stalk fit/plug into the existing slot?
vocky the stalk can be swapped over, but here is another 4 pin plug which needs wiring up. I don't have the pics any more due to swapping pc's a few times since, but might have them on an old back up cd somewhere dunno..
poundy vocky said: found them i brought the wrong stalk lol i got the one without the mid buttons.....wat a cock !! :wtf:
Matt The variable speed intermittent wipers is one of the things I miss about the Vectra C I had, was VERY useful
poundy well first i was prick of the week!!! so now i must be prick of the month lol first i brought the wrong stalk because it didnt have the mid buttons on it 🙁 so i brought one with the mid buttons on it!!! ,however i didnt look properly as i have now got one that doesnt have the rear wipe facility lol!!! so you can all have a jolly good xmas laugh on me!! anyway i now have one that is sutable for a saloon car spare so first person to pm me with thier address can have it as im not going to bother trying to re sell it cheers..
Road_rage Morning all about to do this modification in the nice cold just been reading the info that i found am i right that the black/white wire from the omega stick you join together into the black/yellow wire pin 9(J) on the stalk socket and also the same for the black/yellow wire from the omega stick join together to the black/red wire pin 3(w)in the stalk socket.