Z22EVO build #2 B207R supercharged

[evocarlos]

porting stock check
fags - check
fizzy drink - check
new lamp - check
safety glasses and ear plugs - check
soothers for me cold - check


size before hand the stainless flange is what my head is ported to


made a start carbide burr 1st then flap wheel




diy flap wheel and a new roll of emery cloth

 

[evocarlos]

yawn!!!
ear plugs sort of work but need a dust mask now going to stick me painters one on

 

[Matt]

Looking good Carl

 

[evocarlos]

Looking good Carl

thanks im getting more and more p**sed off with porting lol it would be nice if it was fun or only took 5mins

 

[Matt]

I got bored doing the airbox on my Vectra C, and that only took about 20 minutes

 

[evocarlos]

had a bit of a spurt of enthusiasm

 

[evocarlos]

been back in the batcave today and finished off the exhaust ports still need to sand them
pics are the ruff cut with a round 12mm carbide burr
#1


#2


#3


#4


overall view


going in to hospital in the morning to get my hand cut open so will be out of action for 2 weeks for working on this and doing chain fitting

 

[Dave Gilbert]

i hope it all goes well for u mate, good luck

 

[milo]

Hope it all goes straight forward bud

 

[Matt]

Hope the op goes well mate.

 

[evocarlos]

didnt happen went in for 9:30am sat around for a bit got called in then sat around abit
got seen and then sent for another xray they didn't do the op but they want me to go back and have an ultrasound on it

 

[milo]

Did u get any reason why u didn't get the OP?

 

[Matt]

That's a bit s**t!

 

[evocarlos]

Did u get any reason why u didn't get the OP?

i don't think they were convinced it needed taking out apart from the lump and the stabbing pain ive had the last 5 months
there were some concerns that the pain after the op would be more than im getting now and that there would be a scar
that and the fact is close to the nerve and could be stuck to the tendon

That's a bit s**t!

and heres was me set to have another 2 weeks off work under recovery got to go back tomorrow now

 

[milo]

Hey look on the bright side!! U be fit and well to do my car now . Every cloud has a silver lining lol

 

[Sjdickso]

Hope it gets sorted either way.

 

[corsaZ22se]

hope your fit and well soon mate, I f*****g hate doctors! mine told me a few weeks ago that I have liver failure
I mean really?? got a second opinion and was told not to worry all is fine
good work with the head porting

 

[evocarlos]

Hey look on the bright side!! U be fit and well to do my car now . Every cloud has a silver lining lol

thats the bright side lol it involves me working haha

Hope it gets sorted either way.

thanks si

hope your fit and well soon mate, I f*****g hate doctors! mine told me a few weeks ago that I have liver failure
I mean really?? got a second opinion and was told not to worry all is fine
good work with the head porting

thanks i really do hate head porting lol
liver failure lol must be your insides moving about from all that power in the corsa

as for the hand thanks to all the prodding and poking today its now swollen
right between the 2 middle knuckles

 

[evocarlos]

lol got fedup with dads hammering of the walls so went and played with the head

cleaned the face and tapped the threads

 

[evocarlos]

had a dabble on the inlet side


not going to do much was just to remove the casting lines