Vectra C Power steering pump

Hi everybody.
On my Vec C Z22SE/AT5 the power steering pump has stopped working. There is a unit with rectangular shaped oil tank and white connectors. I have a spare pump, wich is fully woking, also has the rectangular shaped oil tank but the connectors are black. Could this pump be swapped for the black one?

Best regards
Igor
 

ob one

Regular Member
if it has a electric pump like the zafira mk1 I would check the fuse first mine packed up and the fuse just needed cleaning
 
It is this type:

It has faulty oil temperature sensor. It works for about 1minute and then goes off with DTC Oil temperature too high, but the oil is still cold. So i think it will the pump. Fuses seems to be OK. (Did you mean the High power pump for the motor, or the lower fuse for the control circuitry?
 

Attachments

  • IMG-109f94295cacb935df8cee86ea46cad1-V.jpg
    IMG-109f94295cacb935df8cee86ea46cad1-V.jpg
    103.3 KB · Views: 406
  • IMG-758f0e77db9d7cfb104a5750f1fc9f16-V.jpg
    IMG-758f0e77db9d7cfb104a5750f1fc9f16-V.jpg
    39.8 KB · Views: 232
  • IMG-dbd10dce4b431f4460ba53a53e84e7a9-V.jpg
    IMG-dbd10dce4b431f4460ba53a53e84e7a9-V.jpg
    59.1 KB · Views: 294
Hi everybody,
i just swapped the pumps. Everything works ok after proper variant coding and CAN programming. So if everyone encounter a failed pump the black connectors (equipeed with fluid level sensor) and white connector (without level sensor) can be swapped.
 
Top