Eaton M62 Lightweight rotors : possible DIY ?

Marty64

Regular Member
Hi guys,

See this pic on cobalt SS forum:

awww_google_fr_url_4369e1ba3d4dc76e634a9b489de8cfe4._.jpg


Do you think is it possible to do this with our stock rotors ?
With drill press, dremel or something like that.
Stock rotors are enough strong to support this mod or need another material type ?
Think about it cause will be rebuild my SC and porting it.
 

dewismotorsport

Senior Member
Can't remember if there curved low down as well if not could be possible but would have to be precision and equal else it would be out of balance
 
Top