You are currently viewing our forum as a Guest.
By registering not only can you take part in the forum, it will also remove most of the adverts.

Eaton M62 Lightweight rotors : possible DIY ?

Discussion in 'Supercharger' started by Marty64, May 8, 2015.

  1. Hi guys,

    See this pic on cobalt SS forum:

    awww_google_fr_url_4369e1ba3d4dc76e634a9b489de8cfe4._.

    Do you think is it possible to do this with our stock rotors ?
    With drill press, dremel or something like that.
    Stock rotors are enough strong to support this mod or need another material type ?
    Think about it cause will be rebuild my SC and porting it.
     
  2. Can't remember if there curved low down as well if not could be possible but would have to be precision and equal else it would be out of balance
     
    • Agree Agree x 3