rebuild

Okay as some of you have read in a previous post i am rebuilding a z22se for my car. I figurer i would make a New post for Help and pictures for other if some in the future can use it. And og i need Help to have it all at One place. First off my plans. Balance shaft remove. Rebuild with all...

Hi guys just a quick update after my top end rebuild on a tight budget. Everything is working great done about 800 miles so far and its all good. the veccy still idles great, she pulls fine. Using no oil, coolant same. im still really proud of myself for even attempting doing the chains and...

It's been confirmed big end gone need engine rebuild on cheap dont care about time scale just want my girl no up n running if you can help text me 07490713303 in Coventry

Hi im searching for a loan of a valve spring compressor for a quick loan of. Im really desperate, will be ordering the valves soon hopefully. Cheers guys im in motherwell

so here is my 6 speed conversion adventure it will take a while but i now have the box and shafts time to get the clutch changed and the attaching parts to make it work thanks to 20vt for the box :) removing the engine and gearbox the technical way got the box on the bench to inspect...

got bored so i took my supercharger apart :) step one rebuild and clean the snout the snout contains 2 bearings and a twin lip viton seal 1x 6204 c3 (must be c3 rating for high speed oll/heat clearance) 1x 6203 c3 (must be c3 rating for high speed oil/heat clearance) 1x 20x47x7-R21(must be...

Hey all, Bought a zafira sri 2.2 petrol, with the waterlogged auto ptoblem... Most of you know the autobox pumps the fluid through the oil cooler, which is in the rad! Basically the seals go and the autobox gets filled with coolant. The coolant chemicals eats the plates in the autobox, and...

Well a few weeks ago the car started to smoke after a few seconds after being on idle, so the obvious valve stem oil seals where shot. So i went about to change them but after removing the air box i found this under it hiding away so me being me i could not hack that and decided it needed to...

I've got a tapping noise after the engine was rebuild which seems to happen at idle but very low noise and loud at 2000rpm-3000+rpm at different points of throttle. When its light I'll try doing a video. But when I've been to a garage they pointed at the pistons saying it could be that rattling...

hi guys, just wondered if any of you have repaired a blown piston without taking the engine out, is it possible as i am a i bit limited to space in my garage where my car lay dead lol. i got it towed back from the garage after they had stripped the head off and saw the damage then called me to...

buying a vx220 next week :D going to strip it down and fully restore it :eek: wish me luck links to some of my vx220 component build threads 6 speed box https://z22se.co.uk/threads/6-speed-conversion.7102/ throttle bodies https://z22se.co.uk/threads/webcon-throttle-bodies.9736/ engine...