Search results for query: *

  1. N

    For Sale Saab b207 head

    Saab b207 head for sale I have had it checked professionally and all is good. £100 Ono + delivery at cost of pickup Bedfordshire
  2. N

    For Sale High Spec engine with Harrop supercharger

    This is in my vx220 but have decided to break the car, Bedfordshire location Engine Z22SE 81,000miles 23,000 since total rebuild (58,642) by CMS Wiseco 8.9 pistons .02 oversize Eagle rods Comp blower cams stage 2 Balance shafts removed Ported Z22SE cylinder head, Supertech double valve...
  3. N

    Courtenay Harrup Supercharger A Stage Too Far!

    it's quick:LOL: forgot to mention there is a group buy over on the vx220 site if anyone wants one http://www.vx220.org.uk/forums/topic/117697-harrop-lsj-supercharger/#entry1429412
  4. N

    Courtenay Harrup Supercharger A Stage Too Far!

    Just thought I would finnish this tread off now AT LAST Jan 09 this thing started wow, well back to standard z22se ecu and mapped yesterday, figures came out at 366bhp and just shy of 300 ftlb that was on a 2.9 pulley big thanks to CMS for all their help with this
  5. N

    DTA throttle controller

    How you get on Rik?
  6. N

    Courtenay Harrup Supercharger A Stage Too Far!

    So finally got time to give an update on this ecu transplant. Most will know this has taken a long time and a fair amount of money for me to go down this route, I have had the car back for some time now, the mapping has just not been correct, CMS and Klassen have worked for many months, in fact...
  7. N

    DTA throttle controller

    Good are you 68mm TB Rik?
  8. N

    DTA throttle controller

    WOW PLEASE keep me updated
  9. N

    blower cams

    Rik if they are comp cams you will need to be aware they will not probably just go straight in as timing with Comp cams VERY iffy, That was what caused me all that trouble years ago I need up putting in saab b207 verniers, you could also look at removing the lug on the z22se verniers, FLD did...
  10. N

    DTA S40 ECU and loom

    bump £400 delivered ono Also have a PLX wideband lambda for sale £110
  11. N

    80mm Throttle body

    I have an 80mm cable throttle body for sale new and never used. £80 delivered ONO
  12. N

    DTA S40 ECU and loom

    I have a DTA S40 ecu for sale I brought it for a project (used), however I didn't use it, it comes complete with pinned loom and ecu plug as well as the manual. Looking for £470 delivered
  13. N

    Courtenay Harrup Supercharger A Stage Too Far!

    The last set of figures to come out were 377bhp and 304lbs at 7300rpm on an 80mm pulley. Temp in the dyno area was about 20 C. Think I will leave it at that, peak power was about 7300rpm, inlet temp reached 60C so realistically if I want more than say 390bhp I would be into some extra cooling...
  14. N

    Courtenay Harrup Supercharger A Stage Too Far!

    After a bit of a saga with cams incorrectly setup due to comp cams not placing the locating lugs in the correct position, changing the ecu to a z20let and lots of other niggles we finally got a power run today, so far its mapped up to 6800rpm (7200rpm is about where I want to be) got 360bhp and...
  15. N

    Courtenay Harrup Supercharger A Stage Too Far!

    yea LOTS of money has to be spent, I mentioned those figures from the cobaltss.netbut I do wonder about some of the claimed figures from the states. also that site has a lot of info worth a look
  16. N

    Courtenay Harrup Supercharger A Stage Too Far!

    400-450 you will need liners, up to about 400 you should be ok, it will make a price difference. If you accept the lower bhp all the info is available you just have to chose the parts from the list and start searching for prices
  17. N

    Courtenay Harrup Supercharger A Stage Too Far!

    Still no word, suspense is killing me
  18. N

    Courtenay Harrup Supercharger A Stage Too Far!

    This is what you call a slightly late update :lol: but after over 2 years of me messing around I decided to get the ecu transplant sorted, With a enormous help from Vocky who sorted the loom out for Techieboy , who lent ? it to me, the car is now over at Cortenays again getting mapped. I...
  19. N

    stainless steel bolts into cylinder head?

    I have been asked by my wife to nip over to Mk to buy some furniture,so could turn a loss of a trip into something good, great :D if you don't mind pming me your post code :thumbup: I can also drop that saab engine plate off
  20. N

    stainless steel bolts into cylinder head?

    Will try to get some zinc one, since I took zinc out thought that would be the case, doesn't help bank holiday and trying to get this sorted asap. The one which failed ( second time now) were closest to number one cylinder the one directly over the intake and the one at the side next to it...
Top