Search results for query: *

Try diagnostics to figure out source of the problem.

Coil pack?

It's depends on car model. For Zafira it's pain, even got to remove air conditioner tubes from compressor in order to remove the manifold.

You got Signum 2.2 direct? I'm no expert, but it seems to be screwed up ecu.

Indicator of overfueling would be overheating of exhaust manifold. Check that also.

Hello guys. I'm wondering, what's your Z22SE idle fuel consumption, warm engine 80C? 0.6 l/h 0,132 gal/h 0.7 l/h 0,154 gal/h 0.8 l/h 0,176 gal/h 0.9 l/h 0,198 gal/h 1.0 l/h 0,220 gal/h 1.1 l/h 0,242 gal/h 1.2 l/h 0,264 gal/h 1.3 l/h 0,286 gal/h 1.4 l/h 0,308 gal/h 1.5 l/h 0,330 gal/h

All right, thanks to help and guidance of positive successfully updated my ecu with newer software version, now egr disabled in ecu. (y)

How did You uploaded it? I mean did you flashed other bin file from 2005 car, or modified your original?

check PM

First thing spotted: Try to look in this direction.

Hey mate. I was working on prototype of cdc3 emulator for cdr600 / ccrt700. However, as i don't have a working cdc3 unit, I can't clone the communication of it. So the project is stuck at the moment :( Its seems to be impossible to find cdc3. Keep in mind, that ncdr ccd3 version doesn't work...

Add 6l between oil changes :D p.s. Mine oil consumptin is grater than 0.6l / 1000km :(

Opcom live data in studio.

No, i haven't done that, just compression test.

Hey patricks I think I tried everything. 1) cleaned inlet valve 2) pcv, camcover to inlet egr mod 3) oil cap mod https://z22se.co.uk/threads/my-version-of-the-filler-cap-breather-mod.28430/ 4) different oils.. Nothing actually helps. Next will try valve seal replacement in near future :D

Have same problem. After looking for solution, I have came to conclusion that unfortunately the only actual way to fix this is to change piston rings and valve seals..

Guru evocarlos opinion?

First, why those data is split in several files? What's the Ignition status to do with CANBUS? Something wrong with lambdas, as you can see, sometimes it shows 0 mv at B1S1 O2 Sensor (Bank 1 Sensor 1) and B1S1 O2 Sensor (Bank 1 Sensor 2) Why does it shows Desired Engine Idle Speed 850rpm? z22se...

spanner light - immobilizer problems

1) Ignition Status shifting all the time on/off ?!?!? 2) Intake Air Temperature: 43C, do u live in Africa? 3) your engine got MAF sensor? 4) EGR Position Feedback voltage seems too low. Valve is ok? Did you reset the ecu? p.s. that op-com looks weird, used some strange old op-com version?