Parts Needed
Vectra C Irmscher Pedal Kit
Drill
Allen Key Set
Spanner Set
Masking Tape
First, open your shiny new pedals

Next, you need to remove the rubber covers from the brake a clutch pedal.

Apply masking tape over all 3 pedals so you are able to mark up with a pen, where you need to drill

Selecting the correct drill bit size for the hole, carefully drill through the pedals.
Once the holes are drilled, fitting is simply a case of putting the bolts through the hole, and tightening up using the allen key and spanner


Vectra C Irmscher Pedal Kit
Drill
Allen Key Set
Spanner Set
Masking Tape
First, open your shiny new pedals

Next, you need to remove the rubber covers from the brake a clutch pedal.

Apply masking tape over all 3 pedals so you are able to mark up with a pen, where you need to drill

Selecting the correct drill bit size for the hole, carefully drill through the pedals.
Once the holes are drilled, fitting is simply a case of putting the bolts through the hole, and tightening up using the allen key and spanner

