Resource icon

Total Closure Vectra B

1. locate kick panel by foot pedals see (pic 1).
266_1_1.jpg



2.remove kick panel (cross head screw infront of bonnet catch and flat head at bottom) (pic2) shows wiring before work.
266_2_1.jpg


3.locate central locking control unit (main box at rear).

4.to the right there is a 10mm nut, remove nut and attach the brown wire with the round clip here see (pic3)
266_3_1.jpg


(pic4 shows wire fitted).
266_4_1.jpg


5.locate main 12volt positive feed wire see (pic 5)
266_5_1.jpg


connect the red wire on unit with clip see (pic6).
266_6_1.jpg


6.remove the left hand plug from central locking control unit, locate the black/brown wire, and the blue/black wire see (pic7).
266_7_1.jpg


7.clip these to the wires of the same colour on the unit (pic8), reconnect plug to central locking control unit.
266_8_1.jpg


8.(pic9 shows unit resting amonst loom and all wiring connected ready to refit cover).
266_9_1.jpg


9.test work by putting all windows down and then deadlocking car by keyfob, if successfull all will close as in video clip.
http://video.tinypic.com/player.php?v=20zqrzb

10.refit kick panel.

IF WINDOWS DO NOT CLOSE
you may need to 'program' the windows
1.wind all windows down.
2.close them again holding switch for an extra 5 seconds when closed.
Author
opel cdx
Views
310
First release
Last update
Rating
0.00 star(s) 0 ratings
Top