LHS Chrome p/n 13120744 --- 7.15 + VAT
RHS Chrome p/n 13120745 --- 7.15 + VAT
LHS Plastic back p/n 13120200 --- 6.25 + VAT
RHS Plastic back p/n 13120201 ------ 6.25 + VAT
So, bumper off
While the bumper was off, I took the time to clean everything behind it, and give it a coat of wax for protection (taking a leaf out of Mark's book there)
Soaked in Meguiars APC
Agitated, and rinsed off
While the bumper was off as well, I noticed before the near side headlight was slightly loose. Turned out this bolt wasn't set in the fixing behind it, so sorted that as well.
Foglight units removed, those were caked in s**te as well, so gave them a soak in APC and a brush down
Nice and clean
The new bits
Fitted and bumper re-attached
I then had to make another trip to VX to get the plastic rivets which hold the bumper on the bottom, as there were only two fitted (think this may also have been the cause of a low speed rattle!) so 89p later 4 new rivets fitted.
RHS Chrome p/n 13120745 --- 7.15 + VAT
LHS Plastic back p/n 13120200 --- 6.25 + VAT
RHS Plastic back p/n 13120201 ------ 6.25 + VAT
So, bumper off
While the bumper was off, I took the time to clean everything behind it, and give it a coat of wax for protection (taking a leaf out of Mark's book there)
Soaked in Meguiars APC
Agitated, and rinsed off
While the bumper was off as well, I noticed before the near side headlight was slightly loose. Turned out this bolt wasn't set in the fixing behind it, so sorted that as well.
Foglight units removed, those were caked in s**te as well, so gave them a soak in APC and a brush down
Nice and clean
The new bits
Fitted and bumper re-attached
I then had to make another trip to VX to get the plastic rivets which hold the bumper on the bottom, as there were only two fitted (think this may also have been the cause of a low speed rattle!) so 89p later 4 new rivets fitted.