Make a new livedata after ECU reset by disconnecing the battery terminal for some time (~30 minutes) to see whether the fuel trims are changed or not. The build up on all plugs should not be the effect of one leaky injector. Anyway, how about you plugs now?
I think it is quite readable with a translator:
https://translate.google.com/translate?hl=en&sl=auto&tl=en&u=https%3A%2F%2Fz22sevectra.blogspot.com%2F2019%2F01%2Fecu-14.html
Have you tried to read in this way?
So far I have 3 methods to disable the EGR functioning:
- By setting all the EGR map...
Only your immo and your ECU have to be paired. If you haven't changed them then there will be no task about it. I don't know whether TECH2 alter anything during or before the flashing, but if you write the raw binary then it is irrelevant what was in it at that section. The old info will be...
I would change back the Delphi coil pack to see whether it is still functioning without fault codes in the "good" car. Then I would still check the connections and the wires around the coil pack. Many non-persistent problems are due to loose contacts or broken wires. Have you changed the rubber...
Have you checked/replaced the spark plugs either?
Does the coil pack still not produce fault code in the model 2005?
How did you recognize the misfire issue? Is that completely disappeared?
This is related to the Camshaft Position Sensor. https://www.obd-codes.com/p0340
Check the connections and the wires first. If these seem ok then you should replace the sensor itself.
Finally I managed to completely disable the EGR by analyzing a lot of factory firmwares (thanks to ZakhooiTM). No more activity and no more fault codes. :) In addition I identified the subroutine and the structure that generates the fault codes, so theoretically it is possible to deactivate...
I don't think you fixed anything or maybe temporarily. The tip of the electrode, the thread, the ceramic body and the hexagon are like the new. The carbon build up is only the result of the overfuelling not the root cause. Since all the four is the same you can exclude a leaky injector. It...
Hmm, that's no problem. The Astra and the Vectra firmware are quite similar. I've used this one for a few month for my car without any issues: 12594688AH / 12594690
You are currently viewing our forum as a Guest.
By registering not only can you take part in the forum, it will also remove most of the adverts.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.