Recent content by Euan Struthers

  1. Euan Struthers

    Z22yh cam chains

    Cheers I got my timing bang on turned engine round good few times and the coloured links are running out, I'm now taking the head off , think it's a valve , head is stuck solid,any tips how to get it off??
  2. Euan Struthers

    Z22yh cam chains

    See when you pull the pin it pushes back with force, like it's running up a ratchet,what's best way to test it with no oil pressure,
  3. Euan Struthers

    Z22yh cam chains

    Hi I have a new one of this one that fires onto chain ok, it's the small one that sits inside
  4. Euan Struthers

    Z22yh cam chains

    Member Hi vocky I stay across the road from a good wee shop called Car Gear he can get most things but can't get it as it's part of a set just like the gears, think it's the tensioner too☹️ How much would a cheap head come in about, Im hoping it's not a valve problem too, don't want to get rid...
  5. Euan Struthers

    Z22yh cam chains

    .
  6. Euan Struthers

    Z22yh cam chains

    Hi vocky I stay across the road from a good wee shop called Car Gear he can get most things but can't get it as it's part of a set just like the gears, think it's the tensioner too☹️ How much would a cheap head come in about, Im hoping it's not a valve problem too, don't want to get rid of car...
  7. Euan Struthers

    Z22yh cam chains

    Hi I just did my chain on a z22se after a few weeks started again so had a look, yesterday the big guide with adjuster at top bolt at bottom, the bolt had snapped, so I fixed it primed the adjuster but I can hear it moving, the adjuster might be knackered I'm guessing, what else can it be dont...
  8. Euan Struthers

    Just did chain running rattly down on a cylinder

    I took the cover off the chain was a good bit out ,the bolt on the long guide was broken so the tensioner wasn't pushing against anything, reset timing replaced bolt and still rattling, might it be sticky valves got a vid of noise but can't get it to post
  9. Euan Struthers

    Just did chain running rattly down on a cylinder

    I got a garage to do the job , can I unscrew the tensioner and check if it's sprung, if it's jumped do I hav to strip it all down again??
  10. Euan Struthers

    Just did chain running rattly down on a cylinder

    I did the chain went great for a couple of weeks, then started getting sluggish, went down to 3 cylinders, now Sounds like a bag of spanners, ??? Any information would be great guys
  11. Euan Struthers

    How 2 fit cam chains

    Thanks Again
  12. Euan Struthers

    How 2 fit cam chains

    Hiya vocky is their enough space to get to the bottom end just being of the mount jacked up Sent from my iPhone using Tapatalk
  13. Euan Struthers

    Z22SE Z22SE Timing and balance shaft kit renewal

    Hi am at my work going through the chain thread, thanks for sharing them , i am going to do it now, i was going to try it blind but this really helps cheers again Sent from my iPhone using Tapatalk
  14. Euan Struthers

    Z22SE Z22SE Timing and balance shaft kit renewal

    Thanks for that thread [emoji1303] Sent from my iPhone using Tapatalk
Top