Recent content by cavaddict

Got 196bhp out of mine Neil having done pretty much what you're about to do although I used the Z22SE bottom end. Be interesting to see how yours goes.

Haven't actually looked at it yet, been too cold and wet and i've had man flu too. Am gonna put a cat replacement pipe in ( when i've made one ) next to see what happens. Come the summer i intend to change the complete loom as i have climate and hids waiting to go in. Glad yours is...

I have lost cruise, but i do have the spanner light with a code for the brake light switch. However, ive changed the switch and still the same. Need to get the meter on to it. This has been like this for a while so dont think this has any bearing on my current fault. Brake lights work fine by...

Cheers Carl, this is as mine is and the opposite of what Courtenays say it should be. Hmmmmm, well at least i can rule that out then ;-)

Hi Don, havent had any time to get back into this due to work, weather and man-flu reasons. The battery on mine is as big as it will fit and also a calcium one too. Would still be intetested to know what the 'normal' state of the clutch switch should be as OPCOM shows mine as active when up and...

Have picked up a piece of 70mm mandrel bent ali tubing to improve gas flow and let me fit the 68mm tb I got off of Carl. Never did like the bend on the plenum.

Mine does it whenever you depress the clutch Might have a look and see if i have another throttle switch as this is something i haven't changed yet and it must be a ' wearing ' part. I'm wondering if it has something to do with the cat, as this is the only other thing that was changed when the...

Cheers Carl, will give it a bash.

Am gonna have a go at splitting my FK angel eyes in order to fit some new halo rings. Now I'm sure I've seen a ' how to ' somewhere but can't find it now. Think there was some mention of gently heating them in an oven to soften the glue. Any ideas guys?

Soz Dave, not something i need to do on a 'b'. Sure someone will be along soon.

engine gives the clutch switch.....think it was on the 3rd page

If you know how to plug in and get to the codes, then youre half way there. If you go into ' diagnostics ' you can then press ' measuring blocks ' and this will give you the ouputs from the various sensors & switches. Dont know if the Corsa would the same, but think the Vec would be if it has...

So when you've gone through auto vehicle recognition, yiu can read the codes. You should also see a button marked measuring blocks and that is where the info is.

lol Dave. Have you got the usb to obd connector?

Righty......new ecu has cured most probs with exception to the flaring revs. With OPCOM in it says the clutch switch is active when not in use and inactive when depressed. This seems to be the opposite of what the Haynes wiring diagram is showing. I have 4 spare switches here and all meter the...