Full exhaust system Vectra B 2.2 SRi 150

[littlegreyfella]

Hi all

Can anyone give me any help or advice for where to go to get a full exhaust system for my Vectra B SRi. The cat has gone, it has a hole near the rear and another near the flexi. My local garage have quoted me £600 odd. Any advice anyone has would be welcome. Thanks.

 

[corsaZ22se]

The cat section is the expensive part, it is the downpipe, flexi and cat in 1 bit.
I can say from experience don't get a BM Cat as they are useless!
Personally after this I made my own down pipes and use a Remus cat back system on the Vectra B but that was 16 years ago now.
You may find getting a local fabrication shop to make a custom one will give you a better exhaust for the money over a Kwik fit type place.

 

[Gary75]

Hi all

Can anyone give me any help or advice for where to go to get a full exhaust system for my Vectra B SRi. The cat has gone, it has a hole near the rear and another near the flexi. My local garage have quoted me £600 odd. Any advice anyone has would be welcome. Thanks.

Hi, I had a new cat for my sri about 6 years ago from main dealer it was £650 just for that section, front section was from a local exhaust garage. Not sure if this helps, as already said, cat is expensive.

 

[KevinH]

As corsaZ22se says the downpipe, flexi pipe and catalyst are all one piece on the Vectra.

Now then, are you all sitting down!
A genuine GM Part - Pipe, Exhaust, Front, with Catalyst (Ident FK) - part # 93189884 (supersedes 24461058, 24434669) costs £1054.00 (inc surcharge of £80.00)

However, they are well manufactured and good for longevity.

Note: The genuine ones have the pre-cat fitted in the top of downpipe where it meets the manifold.