You'll need to remove the front bumper first. This will then expose all the pipework that needs modifiying. Once the bumper is off, you will see a resonator box located at the inner wing on the O/S. Remove this box leaving the attached pipe open. There is then the air pipe that runs along the back of the bumper panel. Cut the end off of it. Lastly, open the airbox, remove the filter and you'll see a pipe entering the front of the airbox. Cut this off flush with the insde face of the box.
This is then the 3-pipe mod completed. Fit the airbox back together and put the bumper back on. You could also add another entrance hole to the fron of the airbox whilst you have everything apart??
Resinator Box on the floor.
Removed Box.
Pipe Left Exposed.