If you look at your Vec C slam panel, here are 2 holes for intakes. The 2.2's goes through the right hand side as you look at it. It then runs along the top of the rad and into the airbox, then back along the rad and into the TB, so loads of heat and bends. Vid actually came up with the idea of what i'm looking to do. Bring the air in through the same hole, straight into a sealed filter (cotton green one, just like Viper but smaller), through the MAF, a 90 bend and into a 90 for the TB. So this should keep it away from the rad with only one bend other than the 90 into the TB.