vectra cold air feed

lds1973

i want to take my original cold air feed out and put 2 x new ones in. I have done the 3 pipe mod apart from the one that goes in the wheel arch, can I get at this without taking the bumper off ie through the front splash guard? or is it a bumper and headlight off job????

I am wanting to do this before I get a K&N.

Cheers

JohnnyN

When I did the 3 pipe mod, I had to take the bumper off anyway to get to the blanked airpipe that runs along behind the bumper and between the rad. I'm not sure about getting to the resinator box in the wheel arch without taking the bumper off. You haven't got to take the headlight unless you want more room to work.

;-)

vocky

I left the wheel arch box in place until I took the bumper off, which worked out to be two years :lol:

just remove all the pies going into the airbox and fit a new old air feed or two cheers..

lds1973

vocky said:
I left the wheel arch box in place until I took the bumper off, which worked out to be two years :lol:

just remove all the pies going into the airbox and fit a new old air feed or two cheers..

dont I need the wheel arch box removed so that I can use the hole to put my new cold air feed in? I thought one new feed goes there and the other in the grill?

vocky

you can probably reach the canistor thingy with the wheel arch liner off dunno..

Daz

vocky said:
you can probably reach the canistor thingy with the wheel arch liner off dunno..

You can see the canistor with the liner off...not sure about the fixing bolts tho...

lds1973

so daz you reckon its a bumper off job to do it properly? if so where do I start? how many screws do I need to take off?
cheers