Fitting the EGR Cheater

Kojot

Re:

vocky said:

So can I use this one for a Astra G x12xe? And do I connect them like this?

vocky said:

EGR Cheater wiring colours

white (green) goes to pin A (wire colour changed to white on latest versions)

yellow goes to pin B

[pin C is not used any more]

blue goes to pin D

red goes to pin E

Oh and with a negative EGR, should i leave it in or should i get a plate instead?

Thanks in advance 🙂

vocky

The non-z22se egr cheater is not available from the z22se shop, it's never been tested and so we don't supply them.

If someone could make one and try it then perhaps we could sell them sometime in the future

john2666

Hi Vocky, tried to do the £10 donation thing for the EGR cheater but it says dont use to pay for egr cheater or do i just go to the shop?
cheers mate
ps where do i get a blanking plate ?

richard

click on the shop link to buy the egr cheater m8 :thumbup:

vocky

blanking plate is from the dealers, about £3.50

egr plate: 24575592

Matt

john2666 said:
Hi Vocky, tried to do the £10 donation thing for the EGR cheater but it says dont use to pay for egr cheater or do i just go to the shop?
cheers mate
ps where do i get a blanking plate ?

As already said, EGR Cheater has to be purchased through the shop:

https://z22se.co.uk/shop/product_inf ... ucts_id=31

luki244

i know that iz old subject, but I have question vocky 🙂 U still do those cheaters? 😃 i was thinking about geting one 🙂

Matt

luki244 said:
i know that iz old subject, but I have question vocky 🙂 U still do those cheaters? 😃 i was thinking about geting one 🙂

If you want an EGR cheater, they are available to buy through the Shop

Inovator

Did anyone test the non z22se EGR cheater? What kind od relay should be used?

cpwfos

on a quick look round my egr valve i cant see any air pipes connected to it ive read in earlier posts that a cam breather pipe
needs blanking with 2ps or an oil catch tank fitted which is my ideal but where is this pipe located ?plus if i do this will it be ok
1)fit cheater
2)remove egr valve completely
3)blank off hole
4)plus if i find it fit breather pipe to oil catch tank
im sorry if this sounds thick i just cant seem to piece the info off all these threads together :thumbup:

cpwfos

would this be ok
http://cgi.ebay.co.uk/ALLOY-OIL-CATCH-T ... 286.c0.m14

vocky

you don't need to blank that pipe, just fit a vauxhall blanking plate and fit a cheater.

to remove that pipe you would need to fit the egr blanking plug, there is a thread with the part number, it's a non vauxhall part

vocky

here you go, this is the thread

viewtopic.php?f=86&t=12915

cpwfos

so the pipe that goes into where hes put that plastic blank under the throttle body would instead go into the oil catch tank i wanna fit also if i do fit the catch tank would i also have to put the balnk as shown in that thread im sorry im confused a bit 🙁

vocky

the oil catch tank goes to the cam cover - if you wish to fit one that is

the blank goes to the 2.2 inlet manifold and is for the egr pipe removal, nothing to do with the oil catch tank system

cpwfos

fitted my egr cheater just now with pins into the plug to make sure i get no errors codes before i start cutting wires i have just a few questions 1 would i get an error code straight away i left it running for 5 mins and reved a bit and fine and 2 my idling seems rough now will this be resolved when i remove the rest of it (valve and pipe) cheers for any help :thumbup:

cpwfos

just took it for a spin up the motorway and had no problems at all but when i stopped at home idling does still seem a little bit jerky

vocky

the blanking plate is what will fix the idle, the egr cheater just mimics the valve for the ecu

cpwfos

nice one thanks for all your help by the way :thumbup:

Gizmo

vocky said:
The non-z22se egr cheater is not available from the z22se shop, it's never been tested and so we don't supply them.

If someone could make one and try it then perhaps we could sell them sometime in the future

Hi Vocky, Been looking through these pages and I'm interested in making the relay type up and giving you guy's some feedback... There is a few vauxhall's I can try this on, My Frontera "B" (X22SE) is the First, and there is a couple of mates (Corsa's B and C) I've spoke to too that are willing

My Question is how could I test to see if it is negitave pole type? and what if any damage would be caused if wrong type fitted? notsure.gif

Many Thanks

« Previous Page Next Page »