Mark_Dj Vocky is the man, I opened them both together and it filled up fine 🙂. I took it to 1.3 bar but looking at it now it's on 1.4 bar. I have closed the taps off again now 🙂. Cheers for the help you lot 🙂
Mark_Dj What happens when the boiler goes into the red? It's very nearly on that now. How can I turn it down a little? Cheers
Sjdickso I would turn the boiler off to be on the safe side and you should be able to release the pressure on the other side like vocky says, other wise you can release the pressure by draining a bit of water from a Rad.
Mark_Dj I think it's holding the fort just fine now. The pressure when I came back in last night was on half 🙂. Thanks again 🙂 🙂
charlie_b Have u tried under ure sink 4 the cold water supply 2 the boiler.Thats wer mines is may look like a braided hose with a valve on it'
jayp1983 if only i had seen this earliar, if anyone has an Q's about plumbing and heating, i'm a apprentice plumber and have been doing it for a few years so i have a range of knowledge on the subject. just ask!!