Balance shaft question

identiti66

patricks said:
If your interested i have one thats ported and ready to go in that's tested and defo wont cause issues

Thanks for the offer, I'll dwell on it a bit. :cool:
Have you much experience of this type of thing?

corsaZ22se

while the engine is out do flywheel and balancer delete.
down pipe could wait but you will need to remove it to get engine out so do it all at once. save up, buy the parts over time then spend a weekend on it. 🙂

identiti66

I doubt we'd be able to do any of it.. haven't the tools, knowledge or space for things like flywheels and engines out. And we can't weld so making a front pipe is a job for someone else too.

patricks

@[deleted] no i havent got much experience at it but on Vockys advice i purchased a spare throttle body in case i took off too much material when porting it and caused dash lights to come on. Turned out i didnt stuff it up and did it right first time so i dont need a spare anymore. So i can guarantee as per my post above you will see a modest improvement in acceleration (especially at around 3000 rpm where the z22se seems to have a flat spot) with no dash lights either. Engine revs more willingly and freely with it especially at lower revs than standard, kinda like the effect of doing the air box mods If your interested 60 AUD delivered to you.

corsaZ22se

identiti66 said:
I doubt we'd be able to do any of it.. haven't the tools, knowledge or space for things like flywheels and engines out. And we can't weld so making a front pipe is a job for someone else too.

if you was closer I would offer to help for small amount of cash.

patricks

corsaZ22se said:
if you was closer I would offer to help for small amount of cash.

Suppose Australia is a bit out of the way then😉

Dave_Gilbert

I have balance delete and lightened flywheel n feels alot quicker but i had it all mapped aswell so all the things came together at once really. 🙂

identiti66

patricks said:
@[deleted] If your interested 60 AUD delivered to you.

I'll keep it in mind.. thanks man..

corsaZ22se said:
if you was closer I would offer to help for small amount of cash.

Always the way mate.. everyone who could help is on the other side of the bloody country.
The front pipe I can possibly get sorted locally, there's a rumour of a s**t hot welder chap, with his own garage, who doesn't rip folk off. That'd be a start.

« Previous Page