tofferson Ok so I've finished porting a polishing head now Got valve guides out, well 9 of them then I gave up and took it to the machine shop for new guides fitting and seats recutting
tofferson Ok so I've finished porting a polishing head now [ATTACH=full]62910[/ATTACH] [ATTACH=full]62911[/ATTACH] [ATTACH=full]62912[/ATTACH] Got valve guides out, well 9 of them then I gave up and took it to the machine shop for new guides fitting and seats recutting
tofferson Head back from machine shop with new guides and seats recut. Ferrea valves, stem seals and supertec springs fitted
tofferson Oil seal in and flywheel sat in place. One think I'm unsure on is my original flywheel bolts had blue loctite on them but my new GM ones don't, it says nothing on tiss about loctite from what I can see, do I need to use loctite or not any help appreciated @[deleted] @[deleted] @[deleted]
figo126 better to be safe than sorry , get it on , is that your engine in the living room just shown my lass, she said id kill you ,we know who wears the trousers in your house , top man like it ,,,,,,,,,,,,🙂🙂🙂🙂🙂🙂🙂🙂
Dave_Gilbert i used loctite on mine. i used what i had so i hope it stays on i also had to take half the heads of my bolts as mine were way to tall and torx bolts( dual mass) i needed the slim hex bolts you have but i didnt have the time to find the right bolts so had to make do so i could fit my lightened flywheel.
tofferson figo126 said: is that your engine in the living room just shown my lass, she said id kill you ,we know who wears the trousers in your house , top man like it ,,,,,,,,,,,,🙂🙂🙂🙂🙂🙂🙂🙂 My lass is ok with it lol as long as it's clean lol its table has wheels so it lives in downstairs toilet
evocarlos red hydrolic locktite on the fly wheel bolts or you will have a wet clutch http://www.loctite.co.uk/loctite-4087.htm?nodeid=8802627026945 mine are machined down c20let arp flywheel bolts 🙂
evocarlos tofferson said: make sure the flash of the head is clear of the springs 🙂 shold of sent it me lol 🙂
tofferson evocarlos said: make sure the flash of the head is clear of the springs 🙂 shold of sent it me lol 🙂 Yer I had a good look befor I put springs in and it all seems to clear ok 🙂
tofferson evocarlos said: did you change the oil in the charger after cooking the powder ? I was too scared to powder coat it lol didn't fancy stripping it all down so I painted it instead 😃
Marty64 tofferson said: I was too scared to powder coat it lol didn't fancy stripping it all down so I painted it instead 😃 Are you talking about painting twin screws or case ?
