Timbo said:
All things are possible, just some are more possible than others (apologies to George Orwell :p)
Johnss, I would think if you can ID which wires are which from the buttons on the wheel, you should be able to link them to the connector for the CC. BUT....do be careful that you don't short something out. Be best to check the wiring diagram as well.
Mate, now I'm thinking about DIY adapter at the radio cable, which would read the input signal and then connect or give power to right wire signal for cruise control..
For CC there are 4x wires, if I get it right, 3x of them get connected to 4th one, do get appropriate action, that is I/R/O. OR was there just enough to give in 12V in the any of the 3x wires to get the appropriate CC action?
Well for now I'm at the concept level, until I figure out how this all works.. 🙂
Here are example of input signal resistance:
