HarleyPete It is @[deleted], a guy I work with had to go through it with his Tiger Avon kit car. The book for it that tells you all the things they test etc. is about an inch or so thick. He had to make sure that everything was compliant before he went for it as it's not cheap either. Mind you, that's where the fun starts once your through it, if he takes it for an MOT somewhere different he ends up having an argument with them about the emissions. As his is a "Q" plate it's exhaust smoke only but he's had testers insist it should have a cat etc. (1.8 fiesta engine in it putting out about 400bhp per ton running twin webber 40's). They can't do a brake test on the rollers as it has a limited slip differential now so they have to do a deceleration test the old fashioned way (which some testers don't have a clue how to do or have even heard of).
corsaZ22se not done to much since the last update but started sound proofing, done roof and rear quarters, only used 80 sheets. 3 layers. got rear trim and roof lining back in as well fitted a 2.5" piper cat back instead of the 2" and she's much quieter now :confused:
corsaZ22se been busy in the man lab rebuilding the engine ready, arp studs, shrick cams, standard z22se bottom end, b207r head, tullet exhaust, standard inlet for now 😉
corsaZ22se time for an update, z22se engine is now fitted, finished sound proofing the floor, test drive went great. had a bit of trouble with the clutch, engine came out twice to sort it. vectra C has a deeper bell housing inside than the earlier z22se cars and the slave cylinder didnt reach the clutch. lucky i had a spare astra g f23 box. wrong ratio's but will do for now until i find another z22se f23 gear box to break for parts.
corsaZ22se well after a mad rush to finish the small sound system and get Betty mot'd in time for PVS all went well 🙂 apart from the rockford amps being low on power 🙁 the 250.1 was so poor it didnt get fitted, just used the 400.4 as a 3 channel amp. untill today when the new JL HD 600/4 amp arrived 😃 more importantly she drives great 😃 just needs the cdti gearbox fitting. while i'm doing it she's getting a new clutch and flywheel to cope with any future engine mods that may come????????? mapping is booked for 25th july up at courtenay sport. may fit the quaife diff before then if clutch turns up in time?
Dave_Gilbert Yi went down to see Betty but the bonnet was closed n nobody about (weather) Gutted I didn't get to see the engine bay. Nice to have a quick chat though mate.
corsaZ22se have to give young Craig a telling off! :LOL: he may have been sat in the tent out of the rain? she will be at vboa if i can get a driver? was good to chat, never found your car, kept getting caught by people and PV mag 🙂
Dave_Gilbert Mine was just across from your Betty near the toilets. Not sure if I'm going to vboa. Might go just for the Sunday
evocarlos corsaZ22se said: i am going for the week end 🙂 thurs - sunday im going i think its a far better event than pvs are you going to be on that stand all on your tod again lol
corsaZ22se may go up thursday evening or friday morning? there will be 2 corsa c z22se's this year :p
corsaZ22se well good trip to Courtenay Sport today 176bhp and 165lbft not bad for simple mods on N/A 🙂 1.2 twinport power 😉
corsaZ22se Soooo, as some of you know i have a spare m62 kit. do i fit it to Betty just for the sound? after all she is going to be a sound car 😉
milo corsaZ22se said: Soooo, as some of you know i have a spare m62 kit. do i fit it to Betty just for the sound? after all she is going to be a sound car 😉 I was looking forward to u doing the throttle bodies bud, but the SC whine is addictive too 😉
