porting the 58mm throttle body

Jamee

Where's sue and sweep???

(sorry, couldnt help myself)

Muncher83

vocky said:
that looks like the egr valve was stuck open :roll:

Should I be doing the EGR valve mod then?

Sjdickso

Mine looked just like that but i doubt it was ever cleaned on it 4 1/2years and 70K.

davemate

would the dirt be a need to clean the air filter?

Muncher83

davemate said:
would the dirt be a need to clean the air filter?

I doubt it, it's on the side closest to the engine, the other side is clean.

markv

This is the way all the TB's look that I've seen that have been on engines where the EGR has been operational. Just goes to show what junk the EGR dumps in the intake of your engine..

Mark

vocky

Muncher83 said:

vocky said:
that looks like the egr valve was stuck open :roll:

Should I be doing the EGR valve mod then?

I would, that's the worst I've seen :?

Sjdickso

Vocky, good job you didnt see mine then.

Muncher83

vocky said:

Muncher83 said:

vocky said:
that looks like the egr valve was stuck open :roll:

Should I be doing the EGR valve mod then?

I would, that's the worst I've seen :?

I ordered one from you last night 🙂

vocky

Muncher83 said:
I ordered one from you last night 🙂

it's ready to post, once I put a stamp on the envelope :lol:

Shamone

I've just ordered one too as it's a VX and I want in gone!

digger

so do i need fast road cams then before i fit my 68mm tb as ive just finished moding it to the standard manifold????

vocky

digger said:
so do i need fast road cams then before i fit my 68mm tb as ive just finished moding it to the standard manifold????

try it and see, it might be too big dunno..

digger

think ill chat up the wife to let me buy cams off vauxparts guy as he seems the cheapest ive seen, i was gona get some anyway just wasnt sure if i needed them before or if it would run ok without the fast rd

blue_se2

Digger how much are the cams off vauxpart?

digger

exchange / blanks
Vauxhall EcoTech 1.8, 2.0, 2.2 & 16-Valve - Fast Road - Hydraulic - 256° (per pair)£165.00£345.00Vauxhall EcoTech 1.8, 2.0, 2.2 & 16-Valve - Fast Road/Competition - Hydraulic - 276° (per pair)£175.00£345.00Vauxhall EcoTech 1.8, 2.0, 2.2 & 16-Valve - Rally/Sprint/Race - Hydraulic - 288° (per pair)N/A£345.00Vauxhall EcoTech 1.8, 2.0, 2.2 & 16-Valve - Ground to Solid Lifter Profile - 284°, 296° & 304° with Solid Lifter convertors and shim kit (per pair) £385.00£565.00
this is wot he sent me when i asked.
he is also a new member on here and aoc user name is vauxhallparts

digger

vauxhallparts
Newbie

Joined: 20 Sep 2007
Last Visit: 22 Sep 2007
Posts: 2

Posted: Thu Sep 20, 2007 8:09 pm Post subject: performance cams

anyone after performance cams or other parts call 01675 464857 for very good prices, we are cheaper than 99% of leading companies.

all cams ground in house singlely and not mass produced rubbish.

to your spec or our own

on behalf of autosprint

vocky

none of those will fit the z22se notsure.gif

they are for the cast iron block 2.2 found in the frontera and omega :roll:

digger

im just going by wot he said i dont know? how do u tell if they will or not?

vocky

it's a common problem, the cam suppliers believe the 2.2's are the same :roll:

the "x22xe/z22xe" and "z22se" are a completely different engine

« Previous Page Next Page »