evocarlos we now have air well sort of the y fitting i bought split when fitting to the compressor so its leaking ffs and some shelving
evocarlos marked and drilled the wall for the shelving on and screwed down wood cut and shit piled on 🙂
evocarlos went back today and got a new fitting no more air leaks and we now have an air supply the painting and air tools can now be used 🙂
evocarlos and heres what ive been doing with the new air feed 🙂 painting up a wing for @[deleted] primer in the sun drying guide coat ready for paint after degreasing 2 coats of color carbon black 2UU
evocarlos even had time to do a family friend's door handle the hanndle had snapped of so bought a new one and painted it up im happy with that 🙂 just a few bits need nibbing and then polishing
evocarlos Dave Gilbert said: Getting a propper workshop setup. u will be up and running full time in no time hahaha. i have 2 🙂 been up and running for about 5years lol just need alot more work to give up the day job and work from home as it stands i would have to work 9days a week to get the same as the 4 days i work lol
evocarlos Dave Gilbert said: Looking good. You will need a lift next. one day lol the 6ton axle stands will have to do for now 🙂
Dave_Gilbert 1 of these would be good enough for constant home use hahahaha http://www.ebay.co.uk/itm/MOBILE-SCISSOR-CAR-LIFT-VEHICLE-LIFT-not-2-post-lift-BRAND-NEW-/251641939014?pt=LH_DefaultDomain_3&hash=item3a97074446
evocarlos Dave Gilbert said: 1 of these would be good enough for constant home use hahahaha http://www.ebay.co.uk/itm/MOBILE-SCISSOR-CAR-LIFT-VEHICLE-LIFT-not-2-post-lift-BRAND-NEW-/251641939014?pt=LH_DefaultDomain_3&hash=item3a97074446 lol http://www.ebay.co.uk/itm/ADJUSTABLE-CAR-RAMPS-CAR-LIFTS-NOT-HYDRAULIC-CAR-RAMPS-CJAUTOS-CR02/231291389535?_trksid=p2047675.c100010.m2109&_trkparms=aid%3D555012%26algo%3DPW.MBE%26ao%3D1%26asc%3D20140221143405%26meid%3D989fa26826e34b1f96bf4fcb53b44934%26pid%3D100010%26prg%3D20140221143405%26rk%3D7%26rkt%3D24%26sd%3D251641939014
Dave_Gilbert There not a bad idea. You could jack them right up then drop onto a axle stand if wheels needed to come off
jwalker Carl what filters do you use for painting? This is something I need to start looking at, my wheels are fooked
evocarlos jwalker said: Carl what filters do you use for painting? This is something I need to start looking at, my wheels are fooked i use the fine paper paint filter with 280 micron mesh and then a water/moisture trap on the gun i use for lacquering to stop the fish eyes
evocarlos picked up some matting for the floor so my back dont get cold going to be spending some time down there lol
