So what did you get on the Rollers????

Andy_Coupe

Mods are,

Remap, Cat back system, pre cat removed, panel filter, air box mod and veccy pipe.

Max Power 150.7 HP@ 5850RPM
Correct Power DIN 154.8 HP

TRQ 158.8 lbs/ft

Daz

I got

Max power 151.6 hp at rpm 4925
Correct power din 155.2hp
torque 162.9 @4850rpm

Mods...K+n panel filter ,precat removed,remus centre and magnex rear

Baz

I got

Max power 153.1 hp at rpm 5925
Correct power din 156.5bhp
torque 150.9 @3752rpm

1 mod k&n panel filter

JohnnyN

Max Power 170.5 Hp at 6000 RPM
Correct Power DIN 175.3 Hp
Torque 153 lb/ft at 5250 RPM

It would seem that my throttle body needs cleaning too according to the tester. He seemed to feel that the T/B was sticking.

what..

ATOM_X

My results

I got

First run

192.3 HP @ 7050
151.9 Lbs/ft @ 3625

Second run

199.6 HP @ 7200
153.4 Lbs/ft @ 5025

Thats running through a auto box with 30-40% transmission loss

Next year I will run a manual box

Matt

First run I got 98.7bhp, but there was a huge flat spot from 4000rpm to 5500rpm.

The tested had the car on the tech2, and it showed a fault with the MAF, and there was no signal coming from it to the ECU. Not sure what he did to fix it, but on the 2nd run I got:

103.9bhp @ 5850rpm
108.9lb/ft torque @ 3700rpm

I'm happy with that, with just a Pipercross panel filter, and de-restricted air box. Going to do the Veccy C pipe mod this week as well, and should then see 105bhp.

Standard on these engines is 99bhp @ 6000rpm

Kidd_Sri

I got

Max Power: 160.0 Hp @ RPM 5850
Correct Power Dim: 164.4 HP
Torque: 159.2 Lbs/ft @ RPM 4200

Told my tracking needed to be done cause it was losing traction on left wheel & creates drag. I prob do a retest soon once i get my tracking sorted, any recommendations to go to? Rang up Lookers Vx and they told me it would be £70 for tracking!!!!!!! Im sure its usually £40

Matt

£70 is very expensive for tracking. Places near me only charge £30, and there is no charge if it doesn't need adjusting.

Andy_Coupe

£15-£25 near me!

Daz

I paid a tenner for 4 wheel laser tracking 😃

He usually chrages £50 tho,which i didnt think was a bad price anyhow..

We do tracking at my works but i think my boss borrowed the guages of noah..I dont like using em so would rather get it done properly..

Blue_2_2

Re: My results

zafiraz22se said:
Hi

I got

First run

192.3 HP @ 7050
151.9 Lbs/ft @ 3625

Second run

199.6 HP @ 7200
153.4 Lbs/ft @ 5025

Thats running through a auto box with 30-40% transmission loss

Next year I will run a manual box

Impressive result!, what mods have you got?

Jatie_150

Re: My results

2198cc said:

zafiraz22se said:
Hi

I got

First run

192.3 HP @ 7050
151.9 Lbs/ft @ 3625

Second run

199.6 HP @ 7200
153.4 Lbs/ft @ 5025

Thats running through a auto box with 30-40% transmission loss

Next year I will run a manual box

Impressive result!, what mods have you got?

Yeah what you had done drool.gif

Andy_Coupe

From what i could remember he had a Saab head and a custom inlet manifold plus lots more!!

Blue_2_2

why dosnt someone make a chart with everyone name, car model, engine, mods, bhp and torque on?

BlackAstra2_2

I got

I got:

Max power 150.7 hp at 5725rpm

Corrected power DIN 154.7 hp

Torque 159.9 Lbs/ft at 4025 rpm

I've added the dyno graph to my garage. Does anyone else think it's strange how the power and torque of my engine sharply changes at 4000rpm?

Really enjoyed the RR day and it was great to meet you people.

zafman

i got max 185.9 at rpm:5625
correct power din:190.7
torque 184.5 lbs/ft at 5075
cams,full zorst,manifold,sports cat,filter,remap,only use bp ultimate
😃 😃 😃

Daz

Good results there m8...2nd best of the day i think they were..

zafman

thanks,will be interesting to see the magazine report

Matt

word is.......it "might" be in the December 2006 issue dunno..

Pisoiul_Cel_Rau

zafiraz22se: great result...i have the same auto box...