Supercharger to inlet gasket, phenolic spacer and harrop pulleys

haggi961

Anyone got a brand new supercharger to inlet manifold gasket and a new phenolic spacer? I'm also looking for a 3.0 inch and 3.1 inch harrop supercharger pulleys.

evocarlos

thermal gasket form CS
http://www.courtenaysport.co.uk/buy-online/shop-by-category/tuning-components/thermal-inlet-gasket-z22se-s/c/prod_1098.html

i recommend removing the paper gaskets from the spacer and installing 2 z20net inlet gaskets
the paper one gets sucked in after 200 miles

i went to my loacl vx parts desk and ordered 2 metal z20net gaskets had no vacuum leak issues since
theres a part number here
http://www.partsforsaabs.com/product_info.php?products_id=4058

i cant find the 1320 pulleys other than on the harrop.au website :S

evocarlos

ok just had word back from over the pond
tvs pulleys from here
http://www.smoothflowpulleys.com/TVS_Pulley.html

haggi961

I've got the same gasket from CS and I've had the same problem with the paper gasket destroying itself so instead I made some out of gasket paper but still having a boost leak somewhere so Im eliminating anything that could cause it. Will the metal gasket on both sides work ok with the phenolic spacer as i wasn't sure they would work together ok?

haggi961

I've seen the ones from smoothflow but was seeing if anyone has any second hands ones before I buy new.

evocarlos

haggi961 said:
I've got the same gasket from CS and I've had the same problem with the paper gasket destroying itself so instead I made some out of gasket paper but still having a boost leak somewhere so Im eliminating anything that could cause it. Will the metal gasket on both sides work ok with the phenolic spacer as i wasn't sure they would work together ok?

been running fine on mine for the last 6 months with the metal ones 🙂

haggi961 said:
I've seen the ones from smoothflow but was seeing if anyone has any second hands ones before I buy new.

not sure there is anyone here that even has a tvs 🙂

haggi961

Thanks for your help anyway and for less then £10 it's worth a shot for the 2 gaskets. I'm just worried due to the power I'm running its going to create a boost leak.

evocarlos

no worrys 🙂
running on 15-16psi with mine and had no issues with boost or vacuum leaks 🙂

haggi961

That's good to know and just bought 2 gaskets from that link you sent me. I haven't a clue what psi I'm running but should be something similar to yours.

evocarlos

im still using the m62 but get more boost from the standard manifold and a 2.8" pulley
i got my gaskets from vauxhall at the parts desk not sure what i payed i put that link up as it has the part number ""12786262"" for the gaskets 🙂