FAO Andy Coupe

Gazza

how did you get on yesterday mate after the remap ? 😃

Andy_Coupe

Before the map it ran 144 BHP which to me was a little low considering the mods i have done! He mapped the car on the rollers, first run give only 146 BHP, 2nd gave 167 BHP but he said that was too much for the fueling system or something, cant actually remember what he said. He altered the fueling again and it ran 154.8 BHP so that nearly 11 BHP increase at max RPM, also the TRQ has gone up by 10 lbs/ft too. The BHP and TRQ has increased right through the rev range and not just at peak so im happy with the result 😃

Matt

Nice one Andy, can you tell the difference when driving normally?

Gazza

nice one andy good results 😃

does it get rid of the flat spots ?

Andy_Coupe

Matt. yes you can tell with just normall driving, when i set off i can feel the extra TRQ in the low revs.

Gazza, tbh i never really felt any flat spots with mine before the map, but when i compared the graphs from both runs it has smoothed out some of the TRQ dip around the 2000-3000 RPM range. Also the map has not just increased the top end BHP/TRQ and has increased it right through the rev range.

E.G

Before the map at 3000 RPM BHP=73 TRQ=129
After the map at 3000 RPM BHP=79 TRQ=138

Before the map at 5000 RPM BHP=131 TRQ = 139
After the map at 5000 RPM BHP=149 TRQ=154

Max TRQ 159 lbs/ft@ 4250

The guy said i should see it release a few more BHP after it has been run in!