Had these bits of CNC billet alloy porn turn up all the way from Russia with love, massive thanks to SLON who gave me all the advice, info and got them made and sent over, also thanks to Nemisis (Ben) for recieving them and posting them on. These are the brackets to allow me to fit the Audi RS6 brake calipers and also rear plates to allow me to fit the vectra VXR rear calipers.
Had to machine the Audi discs slightly to fit, inner bore is smaller so took it out to 70mm
And once on I found they fouled on the inside on the carrier so machined a bit off the inside and then ground the lugs down slightly to allow myself some expansion room as well
Brackets on
Had to get new banjo bolts as the threads are different but could still use the standard brake line, new DS2500 pads in and bleed up
And done
Well until I realised the wheel fouled the caliper so had to go on the scrounge for some spacers and longer bolts, luckily my mate Nick came to the rescue with some 12mm BMW spacers and bolts (10mm would be perfect). They were 5x120 so I had to mark up my own PCD and trim down the lip to fit inside my alloy
After bedding the pads in my god there good, can almost stand the car on its nose, can't wait to use them on track with the semi slicks on.
Latest pic of the car, needs a clean before PVS
